Go back to previous topic
Forum nameEngine Management Systems & Controllers
Topic subjectTPS Wiring | Callout
Topic URLhttp://forums.2gnt.com/dcboard.php?az=show_topic&forum=54&topic_id=5058&mesg_id=5260
5260, TPS Wiring | Callout
Posted by CODE4, Dec-31-69 06:00 PM
After some bench testing, I verified that the 2.4 TPS sensor pin outs are in the same location as the 2GNT TPS. Revisiting this issue, I have not been able to find an aftermarket or OEM replacement pigtail for our TPS. If yours gets destroyed, burned, or your dog ate it, you are SOL unless you can get a junkyard harness to cut up.

The 2.4L TPS has an OEM replacement (due to post production issues with the harness). Part number, again, is 05013999AA. The colors are generic orange and blue in my kit.

Stock 2GNT on the left, with our harness wiring colors. 2.4L TPS on the right.

I generated this page in 0.0078790187835693 seconds, executing 6 queries.