I started my car up last night, after spending about an hour and a half going through Tunerstudios making sure nothing bad was going to happen when I turn that key. Unfortunately, in my excitement I forgot to put the downpipe back in, which has my WBo2 in it, making the car idle around 2500 and sound like a Nascar. On the plus side of that, it made a diehard Honda fan/Mitsu hater come out to the garage and see what was going on, and actually tell me it sounded "Mean as fuck".

Im going over to the garage today to Solder all my connections, hide some wires, and hopefully get a good idle vid.

95 GS, Crower 2 Cams, Full standalone MSII

YouTube.com

Fuckin A. Congrats! Sounds great - get her tuned!

What did you use for a base map for that start?

FUCKN EARS ARE LIKE AHHHH! LOLLL

Thanks alot man. Its definately not running great, but I think just the fact that I was able to get it running standalone by myself (and help from 2GNT, of course) is awesome. I downloaded a "base map" of sorts from Symtech Labs. It was described as able to start a basically stock 420A Eclipse engine. The only problem is, the map for it was 255, where mine is a 300 if I remember correctly. I actually found something wrong with it too, as only one injector bank was on. I had to turn injector bank 2 on, and just copied the settings from the first bank. Im still in a little over my head with the tuning aspect, but Im going to give it my best try before heading to the dyno to squeeze every drop of power out of it.

Did you use the Symtech board or did you build your own. I'm thinking of going to MS2 from the stock pcm. I was told its alot of reading.

How much did it cost.