| Go back to previous topic |
| Forum name | Engine Management Systems & Controllers |
| Topic subject | wiring on safc 420 96-96 |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i54&topic_id=4770 |
4770, wiring on safc 420 96-96
Posted by mclane_jesse, Feb-06-10 07:15 PM
does any one now how to wire up an safc on a 95-96 420 cuz i have looked every where any every one had answers for a 97-99 420
|
4771, RE: wiring on safc 420 96-96
Posted by mitsu95023, Feb-06-10 07:35 PM
you may have seen this link, but maybe not hope it helps, wish i could help you more but i have never installed one,
http://www.2gnt.com/index.php?d=SAFC_Installation
(pay attention to the note in red about halfway down the write-up...good luck)
|
4772, RE: wiring on safc 420 96-96
Posted by mclane_jesse, Feb-06-10 08:44 PM
ya i have seen it but i dont know if i want to attempt it if no one really knows thanks though
|
4773, RE: wiring on safc 420 96-96
Posted by Slo2g, Feb-07-10 09:08 AM
http://www.2gnt.com/index.php?d=1995_ECU
Thats from our Wiki and for a 95, look at the same for the 97 and compare colors. The colors for the 96 ecu *SHOULD*(I'm not sure on this and do so at your own risk. You need to test before you make connections) be the same. The pins are different but the colors should match.
|
4802, RE: wiring on safc 420 96-96
Posted by tec_41, Mar-17-10 07:09 AM
A little late to chime in but I'll verify...
I wired one into a 95 ECU which is different from 96+. Colors are exactly the same, but pin location is different.
|