I noticed tonight while messing with my engine that the Modern Performance throttle body has a plug in the bottom of it that happens to be the same size as the GM IAT sensor for MSnS(I'm guessing its actually for an IAC on a neon). I was wondering if you guys had any insight on how this would preform since the probe is actually not in the air stream directly? I'm guessing I will have the same problem that I had when I put it in the back of the upper intake manifold...heatsoak, but I thought I would see what others thought about it before I made a final choice. Here are a few pics to show you what I am talking about...

http://imageshack.us>
http://g.imageshack.us/img23/img00003200902190015tc1.jpg/1/>

If the sensor element is not in the air stream I wouldn't use that location. Wont give accurate results. I have mine in the intercooler pipe about 3" in front of the TB.

Originally posted by SilvrEclips
I have mine in the intercooler pipe about 3" in front of the TB.

Same here.

Try a hondata gasket or symtech's PTFE spacer. Might help reduce your intake temps a bit.