Well I want to know if the AEM F/IC is been figured out already cuz last time I checked there where some issues with it and it really has a nice concept and it's all I really need for tunnig. I was really excited when I heard about it and almost ordered one but I decided to research first and found out that in the 420a it had a few issues. I have not seen no recent post of it here so if any of you know anything about it plz share the info. And thanxs in advanced!

lI was reading somewhere that it needs an update to work with the cam and crank sensors on the 420a motors.

Check on som neon forums, also there is a big thread on this over at team-2g, in the 420a section.

From what I have heard, it works good. Its has alot of potential, not as much at the MSnS but I belive its more user friendly.

I was considering this for my car but Ihave gone MSnS

tom

I know of one confirmed working setup on the eclipse 420a but CEL codes still occur. This will require either a hardware or software update from AEM. Unfortunately, I think we still have to wait for them to review our platform, and it doesn't sound like it will happen anytime soon.

yes it works on the 420a motor. I have been running it for about a 100mi or so. Tuning is different but isn't all that bad. I am running 788cc with stock like driveability.