Go back to previous topic |
Forum name | Engine Management Systems & Controllers |
Topic subject | Fuel upgrade |
Topic URL | http://forums.2gnt.com/dcboard.php?az=show_topic&forum=54&topic_id=3701 |
3701, Fuel upgrade Posted by 95eclipseSlow, Dec-31-69 06:00 PM
Say i have the PnP MsNs and some 450cc injectors. What else will i need?
|
3702, RE: Fuel upgrade Posted by Star Turbo Talon, Dec-31-69 06:00 PM
1:1 regulator and all the associated fuel lines. The ability to tune (laptop) wideband for AFR feedback.
|
3703, RE: Fuel upgrade Posted by 95eclipseSlow, Dec-31-69 06:00 PM
will i need a sfmu or a safc? What about a resistor pack?
|
3704, RE: Fuel upgrade Posted by tbone, Dec-31-69 06:00 PM
I cant really answer on the resistor pack.
As for the SACF, NO. the MSnS will has the ability to tune all fuel and ignition needs.
and for the SFMU, again NO! you need to use a 1:1 ratio fuel presure reglator( 1:1 FPR)
Tom
|
3706, RE: Fuel upgrade Posted by 95eclipseSlow, Dec-31-69 06:00 PM
does anyone know what i have to do about the resistor pack?
|
3707, RE: Fuel upgrade Posted by VelocitaPaola, Dec-31-69 06:00 PM
Originally posted by 95eclipseSlow will i need a sfmu or a safc? What about a resistor pack?
Nope, none of that...
|
3708, RE: Fuel upgrade Posted by 95eclipseSlow, Dec-31-69 06:00 PM
nvm i found the write up about it in the Wiki. never really had to go to the fuel section before.
|
3709, RE: Fuel upgrade Posted by 95eclipseSlow, Dec-31-69 06:00 PM
ughhhh i just read something that said with ms you dont have to have a resistor pack with low impedance injectors. Is this true or no?
|
3710, RE: Fuel upgrade Posted by VelocitaPaola, Dec-31-69 06:00 PM
I already said no... you don't need a resistor pack with MS unless you're using the V2.2 board w/o the flyback board, or under a few other special circumstances.
|