Originally posted by WickedESi
I was just talking about a datalog from MegaTune, then looking at it with MegaLogViewer, people in the Megasquirt forums usually just post screenshots of the areas of logs they are concerned with, and then attach the complete datalog.

I just dl the MLV and looked at my log from earlier, but for some reason it doesn't show voltage.

Originally posted by WickedESi
I'm pretty sure you're going to have to run a dedicated power, ground, and signal line from your MS to the crank sensor. This was what made my car drivable with the MS1 processor v3 board, although, I did have to add some additional capacitors on top of that to eliminate some seldom spikes thereafter.

I read this from your original post and i'm looking into that route. The extra caps you speak of, are they the 100nF Mylar caps explained in that snippet that are soldered between the pins of the db37? Thanks for all the help/info guys.