| Go back to previous topic | |
| Forum name | Engine Management Systems & Controllers |
| Topic subject | Which wire and where did you use for your 12v to power up MS? |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i54&topic_id=3341 |
|
3341, Which wire and where did you use for your 12v to power up MS? Posted by eclipse982nrRST, Aug-06-07 08:08 AM I used the black/white wire on the ASD relay but it stays on constantly. I just wanted to see what wire and where (color wire would help me out :) ) you guys used for your 12v to power up your MS ECU? | |
|
3343, RE: Which wire and where did you use for your 12v to power up MS? Posted by Slo2g, Aug-09-07 06:08 PM I used/going to use the main ecu 12v. Thats where I tapped my zeitroinx into so its still on when the car is in timer mode. Or you could always run a line directly to the battery and run it to a relay. I can't remember what color wire right now but I have it here somewhere I will try and find it. I think it black with a white tracer on the top connector of the ecu. Not sure though, let me check. | |
|
3344, RE: Which wire and where did you use for your 12v to power up MS? Posted by bullettdsm, Aug-09-07 10:40 PM I used the stock ignition wire. It is a black and white wire that is in position B20 off the ECU plug (at least for the 96 and 97). | |
|
3345, RE: Which wire and where did you use for your 12v to power up MS? Posted by wickedtalon, Aug-10-07 09:03 AM I also used the black/white wire from the ECU. | |
|
3366, RE: Which wire and where did you use for your 12v to power up MS? Posted by Slushbox, Aug-16-07 10:33 AM Pin 20 here | |
