| Go back to previous topic | | Forum name | Engine Management Systems & Controllers | | Topic subject | Running spark (yeah!), but my MAP values dropped :( | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i54&topic_id=3168 |
3168, Running spark (yeah!), but my MAP values dropped :(
Posted by Slushbox, Apr-29-07 03:58 PM
Before I installed the MS ignition, my MAP value @ WOT was 100 kPa; now with spark it is only hitting 96 :wtf. The car runs much better and feels faster, but the ol' butt dyno hasn't been calibrated so it could be me. I checked my MAP sensor line and it's securely attached.
On another note, I had an issue with the CLT and IAT sensors spiking after the spark was installed. Running an extra 16 AWG wire from the grond (by proto area) to pins 9 and 10, then out to the chassis 10" away solved the spikes.
|
3169, RE: Running spark (yeah!), but my MAP values dropped :(
Posted by WickedESi, May-03-07 03:49 PM
Does it read ~100 kpa w/ the key on run, engine off?
|
3187, RE: Running spark (yeah!), but my MAP values dropped :(
Posted by Slushbox, May-17-07 01:49 PM
The map values were 97 kPa @ rest, I guess things are ok. Thanks
| |