| Go back to previous topic |
| Forum name | Engine Management Systems & Controllers |
| Topic subject | RE: Megasquirt reqd parts accrys |
| Topic URL | http://forums.2gnt.com/dcboard.php?az=show_topic&forum=54&topic_id=1410&mesg_id=1427 |
1427, RE: Megasquirt reqd parts accrys
Posted by Star Turbo Talon, Dec-31-69 06:00 PM
Things Reqd for MS install. Here is a general list of things reqd to run fuel control. Recommend fuel only first till you understand tunability and have it tuned, then run spark.
Fuel system:
1:1 Regulator
A return line back to the fuel tank (96-99 only/95 had a return line)
Injectors
Various fittings
Megasquirt ECU with hardware mods completed to read 420a crak signal
Harness
Injector plugs (4)
Iat sensor plug
Coolant temp sensor plug
Sensors:
Coolant temp sensor.
Intake air temp sensor
DB9 cable for a laptop communication with the Megasquirt.
Serial to usb adapter if your laptop does not have a serial plug
A Laptop! preferrably with a serial port
For spark you need to do some reading, worry about that later.
Terry
|