Well after about 2 hrs of installing injecors and the areomotive regulator I have this sucker running. It actually started on the first crank! I couldn't hardly believe it. I have only taken it around the block so I dont' know if it will run forever but it does run now. My wideband died on me so right now I'm using the stock narrowband it will have to do until the new wideband gets here.
Anyway just wanted to say thanks to all for this forum and all the information that is on this forum.

Major props to Terry for building the unit for me and getting me a great start. The only thing I modded from his settings were the req fuel and the ve table. I got that from ner947's post.

Im not really sure that the req fuel is right. I have the 450cc dsm injectors in there now and the req fuel set at 7.5.
Also what should the idle fuel pressure be. I set static (full vacume) at 43 psi.

Originally posted by RxR_Eclipse
I set static (full vacume) at 43 psi.

I should have stated this better. I meant 0 vac/boost not -17 hg (which is idle vacume).

And some pics of where I mounted the squirt under the passenger seat. A shot of the harness I made and of where the CTS went. (got that spot from Matt in one of his posts)

http://usera.imagecave.com/rxr_eclipse/ms/

Kickass! I just built a new MS for my car because two were stolen from me out of the car. So I had a similar feeling the other day. :) :P

I am using tenzo R seats with stock sliders and both the relay and the squirt don't hit at all. They are pretty accessable too. Not a great spot but it does work. Now I just need to get this sucker tuned in.

Hey anyone here try mounting it using the stock "infinity amp" mount and a lil bracket to adapt the hole posistions. I have one just sitting around and reading other posts on ideas on where to mount it, that idea came across my mind. What do you guys think?

Sounds good. Hard to do much with your datloggs because of the narrow band sensor. the wideband will help you out tremedously.

your fuel pressure looks good, mine is there. your reqd fuel is a tiny bit high. Now that you have my map reloaded drop the req fuel to 7.4 and try that. my 550's were at 7.6. you are def running pretty rich.

Try taking some of your datalogs and entering them into MSTweak3000. Get familier with it because it will save you so much time. I have heard some people claim it runs you too lean but i havent had that problem, actually it has worked very well for me.

Terry

nice thanks terry. I'll try that today. My techedge parts should be here early next week. ( i broke the cable and sensor like a retard!)