i am near completing my standalone megasquiurt. i just need to run my power from my relays to my ignition switch. im wondering which wire i need to tap into. a schematic shows white-constant 12v, blue-ignition, black/white-ignition 2, black/red-starter, blue/black-accessory. i went a little excessive when removing unnecessary wires. i removed a whole harness that includes all the sensors and runs into the firewall on the passenger side. i undertand that the starter relay is located in this harness and behind the cd player. is there a bare bones/simple way to get it wired up? i am fine with not having the clutch sensor wired into the starter wiring.