Sup guys.
I guess it's time.
My brand new engine is up to 2000+ miles, and ready for heavy boost.
I ordered the WBO2 sensor with MS-II on v3.0 board.
They should arrive by the end of this week (busy weekend haahaa)

Now I have to get some other parts.
for my current setup (read below at the banner), I have to change my SFMU to a 1:1 fuel regulator, and change my injectors (since if I run MS, I want 15PSI to 20PSI running)

So please let me know what I should get:
1) Aeromotive 1:1 fuel regulator
2) 600cc injectors (is it good to 20PSI with only 80% duty cycle and with smooth idling?)

That should be it for me am I correct? I really want to know if I am missing anything?? (I have a laptop already as well)

I do have 2 concerns before I can order the FPR and the injectors.
1) for my current SFMU, I got all the AN fitting and so on, will they FIT directly to the Aeromotive 1:1 FPR? or what do you recommend?
2) What injectors do I have to get to work directly for my setup? what brand and where is the cheapest? is 600cc good for 20PSI and not over doing it?

Thanks guys.
I cannot wait to start tunning my car (the RIGHT WAY)
Gil