Go back to previous topic
Forum name2GNT Site/Forum Questions
Topic subject02 pt eclipse 2.4 lower end, with 97 eclipse 2.0 reverced 420a head
Topic URLhttp://forums.2gnt.com/dcboard.php?az=show_topic&forum=53&topic_id=1442
1442, 02 pt eclipse 2.4 lower end, with 97 eclipse 2.0 reverced 420a head
Posted by neon11, Dec-31-69 06:00 PM
we race a 1997 eclipse 420a on a circle track, blue up the 2.0. so i got the idea to put a 2002 2.4 lower end, wwith the eclipse reverced head, cams, exc. i checked, same crank / cam sensors, fireing order, found the right head gasket, went together fine. i no the cam lobe are diff.but, so i used the eclipse head, cams, and lined them up accordingly. spinning over, all inj. have ground pulse, but when it fires i loose #1 and #2 , #3 and #4 have pulse. but always have compression, spark, and inj. power. some one said my cam timing was 180 out, to flip flop the spark plug wires, wouldnt start at all. left the wires that way and put a 2.4 stratus computor. this time it fires and runs on #1 and #2 , #3 and #4 have no pulse ? can some one please help, seemed like a good idea. thanks neon11
1443, RE: 02 pt cruiser 2.4 lower end, with 97 eclipse 2.0 reverced 420a head
Posted by Bluehaze420ars, Dec-31-69 06:00 PM
I thought I read somewhere the cam timing is 90 degrees out not 180. The neon forums should have the information you need. I would use the 420a ecu tho.
1445, RE: 02 pt eclipse 2.4 lower end, with 97 eclipse 2.0 reverced 420a head
Posted by neon11, Dec-31-69 06:00 PM
this is neon11, well i figured it out. when i noticed the cam magnet a 1/4 turn back, i made a bracket and moved the cam sensor back, to no result. dont understand it but i ground the two magnet set ? pins well call them, and moved the magnet clockwise a 1/4 turn.put the sensor where it belonged, and it back fired a little, but didnt fire. so i flipt #1 - #2 and #3 - #4 plug wires, and it fired right up on all four. it had no throtle responce, and i realized i also had to do the same with the inj. plugs. so i extended #2 - #4 about 3" and fliped those as well. the thing runs like a watch. so this combination does work. got this car for free, but im realy a neon racer. won alot of races with them, but always blue up the twin cams, rocker arms, sucked valves. we turn 8000 down the strait with the ecm i have, they wont take it. my goal is, i will build anouther first gen neon coupe, with a 2.4, remove the chain, and ballence shafts, 10 1/2 forged pistons, with the indestrutable single cam head. take out the rt trany, and put a regular 02 neon trany. more tourque, taller gear, motor live, hopefully. we run on a 1/4 mile oval agenst accuras, hondas, vw, eslinger mustangs, and we are mostly in the top three with neon. this season, this eclipse, nothen but a pain in the bobo. but il start next season with it. i hope both posts on this story helps some one out. MOPAR PERFORMENCE
I generated this page in 0.0097589492797852 seconds, executing 7 queries.