| Go back to previous topic |
| Forum name | 2005 DSM ShootOut |
| Topic subject | What still needs to be done? |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i50&topic_id=889 |
889, What still needs to be done?
Posted by DR1665, Jun-19-05 05:57 PM
The Shootout is almost here!
Since we're practically in the home stretch, what do you still need to do to the car before you'r ready to hit the road for Norwalk?
*complete MSnS install (try to tune)
*complete wbO2 install
*complete alarm install
*replace windshield (Can't beat Todd if I can't run!) ;)
*complete GSX brake upgrade
I'm gonna be busy, huh. :+
|
890, RE: What still needs to be done?
Posted by totaleklipse97, Jun-19-05 06:54 PM
1. get car running..
2. GSX brake upgrade
3. RRE SS brake lines
4. ERT custom exhaust
5. Jeep T/b and ported upper mani
6. possible squirted and tuned.. still n/a
7. car re-painted hopefully
|
891, RE: What still needs to be done?
Posted by DarkOne, Jun-19-05 08:02 PM
I think Jesse james said it best:
"So all we have left to do is... Everything."
That's where I am.
|
893, RE: What still needs to be done?
Posted by soulcontroller, Jun-19-05 08:44 PM
wash and wax.
hope my transmission doesnt grenade before then? that is all.
|
895, RE: What still needs to be done?
Posted by Diceman19, Jun-20-05 01:50 AM
if i bring the 2g, alarm, suspension, roll fenders, timing belt, fluids.
if i bring the 1g, fluids.
im thinkin 1g, just expensive on gas. bah.
|
896, RE: What still needs to be done?
Posted by xcasbonx, Jun-20-05 02:55 AM
1.find mtx bellhousing/gearbox (unless Lee somehow surprises me and ships my tranny :rolleyes )
2.get mtx swap completed.
3.install SAFC
4.install suspension (blues w/ tein s-techs)
Shouldn't have a problem, just getting a tranny is holding me back.
 
http://www.dsmregistry.com/detail.php?carid=1030
|
897, RE: What still needs to be done?
Posted by HybriDSM, Jun-20-05 04:54 AM
1) New rear wheel bearings
2) New Rear Axles
3) New 4 bolt rear end
4) Tune on the dyno
5) Repair/replace hung rear caliper
A weekend's worth of work sounds about right for most of the above.
|
899, RE: What still needs to be done?
Posted by SILVERNT, Jun-20-05 06:53 AM
Originally posted by DarkOne
I think Jesse james said it best: "So all we have left to do is... Everything." That's where I am.
|
900, RE: What still needs to be done?
Posted by CrazyEclipse, Jun-20-05 08:00 AM
Originally posted by SILVERNTOriginally posted by DarkOne I think Jesse james said it best: "So all we have left to do is... Everything." That's where I am.
|
902, RE: What still needs to be done?
Posted by 992gnt, Jun-20-05 02:22 PM
I'm ready. I may drop in the cams before then, but even then I don't think I'll be running. How crazy is it that 12.0's (what I should be running with the cams) won't be anywhere close to fast enough to win Evo Stock Appearing? Maybe I'll run just to get some times with the new setup, who knows.
|
909, RE: What still needs to be done?
Posted by whodatt1, Jun-21-05 06:17 AM
hummm...
dp
fuel regulator
fuel pump
boost controler
IC
ic pipes
PS bracket
AC bracket
MS (since that is never coming whatever injector controler i can get)
boost controler
seats (back and front)
center counsel
fix cut interior wiring
wheels
replace 3 broken windows
oil pressure gauge, boost gauge, egt gauge
That should make it driveable.... In other words it will never ever, ever ever ever happen before the SO.
|
912, RE: What still needs to be done?
Posted by DR1665, Jun-22-05 07:14 AM
Originally posted by whodatt1
In other words it will never ever, ever ever ever happen before the SO.
Damn. Shamu will be AWOL. :(
Still, this is gonna be a great weekend. :thumbsup
|