If anyone has any pictures or diagrams of wiring or vac lines I would greatly appreciate it if I could get them. I just did a motor swap, and now I am having problems getting everything to come together again. I am trying to eliminate as many vac lines and pcv valves as possible. I also got rid of the EGR valve, so any picture or information would help greatly, thanks.

Originally posted by axelthrasher
I just did a motor swap, and now I am having problems getting everything to come together again.

As in another stock motor? Just checked my macros and I don't have an image for you to compare. If I had a camera with me, I would snap you a picture, but I got nothing on me.

Anyone else?

Well the vac lines are easy, put one vac line on each port till you fill them all up...lol As for the wireing, it's only one harness, and there is only like 2 places with multiple hook ups. So just put the commections to the sensors and don't push till you know it fits. there is only one way these can go. I don't know if anyone will have a pic with detail on the harness and the vas lines. Look for darkone's signature and there is a service manual link in there. it should have all you need for the harness.

Originally posted by DR1665

Originally posted by axelthrasher I just did a motor swap, and now I am having problems getting everything to come together again.

As in another stock motor? Just checked my macros and I don't have an image for you to compare. If I had a camera with me, I would snap you a picture, but I got nothing on me. Anyone else?

For some odd reason im getting the feeling that it would be a waste of your time anyway brian.

OP- Im also interested in what you a referring to with motor swap. hehe, if your talking 4g63t..."may the force be with you".

http://imageshack.us>

the only vac line u need i think is the leak detection vac line and the brake booster . make sure to run the pcv to a catch can .

where does the leak detection sensor run to?

Line from intake - Leak detection pump then from leak detection pump to vacuum canister
******canister has 2 outlets************
-------------1. canistor - gas tank liquid separator
-------------2. canistor - evap purge solinoid

where is this located in the motor bay?

passenger fender well.

Take a look at the bottom of your hood where the diagram for the vacuum lies is located. Every car has the sticker from the factory, use it.

If you havent picked up a service manual then you might want to.