| Go back to previous topic | | Forum name | Performance/Engine | | Topic subject | Never Mind | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=98975 |
98975, Never Mind
Posted by BumpinTalon, May-27-06 11:55 AM
Never Mind, fixed it... by SEARCHING!
|
98976, RE: Never Mind
Posted by .bs0d, May-27-06 12:47 PM
ok, what was it?
|
98977, RE: Never Mind
Posted by BumpinTalon, May-27-06 12:56 PM
rough idle, sounded like it was firing on three cylinders, problem went away when car warmed up. massive vacuum leak from EGR blockoff plate.
|
98978, RE: Never Mind
Posted by XMasta19, May-27-06 01:12 PM
Did you make the block off yourself or buy the kit? How did you fix this leak...just tighten it more?
|
98979, RE: Never Mind
Posted by BumpinTalon, May-27-06 01:29 PM
Made it myself. My fix is ghetto, until I can get something done properly, I just got some massive washers I had laying around and used those to hold it shut. I need to find some thicker gauge steel for next time, this stuff is too thin..
|
98980, RE: Never Mind
Posted by boosted60trimrst, May-27-06 06:36 PM
i just had the same problem . i used 18 gauge steel and it was to thin. i went to home depot then and started looking around . i found a home electrical outlet box made of steel . i used the cover of it .ity cost 79 cents and its thick as hell .
| |