| Go back to previous topic | | Forum name | Performance/Engine | | Topic subject | wiring harness | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=97262 |
97262, wiring harness
Posted by 420Adebt, Mar-20-06 02:12 PM
sorry to make so many posts but I need to know before tomorrow, b/c I'm going to get the harness tomorrow. I have a 95 and the harness is a 97-99 eclipse, not sure the year but I know its one of those.... the only part of the harness I will be getting is the harness that disconnects from the main wiring harness and goes to the altenator, oil pressure switch, knock sensor and crank positioning sensor. I know the oil pressure switch is different but that's fine, b/c I have that switch for the 97-99's.. I just curious if it is a straight plug in. the plug for the harness disconnects near the heater hoses, but I need to know if that plug will fit my harness..... thanks
|
97267, RE: wiring harness
Posted by gc8dc95, Mar-20-06 03:01 PM
Should not have any problems, except the oil press as you noted. If I remember correctly everything is the same.
|
97272, RE: wiring harness
Posted by selmerguy2003, Mar-20-06 04:20 PM
Air intake temp sensor might be different.
| |