Go back to previous topic
Forum namePerformance/Engine
Topic subjectIntakes
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=9625
9625, Intakes
Posted by run4cvr, Dec-05-01 06:01 AM
I have a question..... i currently have a short ram air intake and was thinking about building a cold air intake. Is there a difference in power gains between the two? I have heard that the short ram offers less restriction meaning that there is more horsepower.... any thoughts?
9626, RE: Intakes
Posted by vegasdsmr, Dec-05-01 06:25 AM
colder denser air going into the engine makes the intake charge cooler. this results in better performance.

i was getting 68 degree intake temp with my shortram and dual ram air setup when it was like 60 degrees outside at WOT. we compared it to an aem cai intake temp, and it didnt see anything under 80, but that was not tested at WOT, just normal driving.

these temps were produced by the obd2software hookdup to a laptop.

the cold air intake(cai) usually gives u like 2 or 3 more hp.
the short ram growls louder

if ya wanna see pics of my setup, check hadesomega photoalbum on his signature in a diff post.
9627, RE: Intakes
Posted by evan2, Dec-05-01 06:56 AM
right now the temp of the air coming in is 50degrees F

it varys

thats with a ice man CAI.. its getting chilly here in fl too
9628, RE: Intakes
Posted by espilcEGS, Dec-05-01 08:25 AM
I had my bypass valve out the other day and left it short ram just to see the differance. I lost some power through the power band. So, when i get my HRC kit i'll try and adapt the CAI to fit.
9629, RE: Intakes
Posted by jplong, Dec-05-01 02:55 PM
I did 2 Dyno runs and have the sheet to prove this. first run was with no air moving across my front end. and i maxed out at 115 HP to the wheels. with a decent fan which simulates about 55 MPH i jumped to 122 HP to the wheels....AEM cold air ...non bypass type.
9630, RE: Intakes
Posted by run4cvr, Dec-05-01 03:21 PM
wow.... thanks for the info. I guess i will start building one now.