| Go back to previous topic |
| Forum name | Performance/Engine |
| Topic subject | Continuous P0340 Code....(Camshaft Pos. Sensor) |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=95578 |
95578, Continuous P0340 Code....(Camshaft Pos. Sensor)
Posted by Bigtymr1021, Jan-06-06 12:09 PM
Im having problems with my camshaft position sensor....I have replaced it numerous times and everytime I start it back up it spits out the P0340 code. I have changed the connector and crankshaft pos. sensor as well...still no good. I just recently adjusted the timing because it was off a single tooth. My car will not run without getting this fixed, cause it spits and sputters then dies.... so I need some help. What do I need to check or fix now?
|
95580, RE: Continuous P0340 Code....(Camshaft Pos. Sensor)
Posted by XMasta19, Jan-06-06 02:51 PM
have you actually disconnected the battery and cleared the code each time but it keeps coming back, or have you yet to actually get rid of the cel since it first appeared?
|
95589, RE: Continuous P0340 Code....(Camshaft Pos. Sensor)
Posted by Bigtymr1021, Jan-07-06 06:48 AM
Originally posted by XMasta19
have you actually disconnected the battery and cleared the code each time but it keeps coming back, or have you yet to actually get rid of the cel since it first appeared?
Yea, disconnected the battery, and cleared it with the ODBII scanner
|
95593, RE: Continuous P0340 Code....(Camshaft Pos. Sensor)
Posted by selmerguy2003, Jan-07-06 11:37 AM
if you have replaced the sensor my guess is that your timing is still off. recheck yout timing
|
95621, RE: Continuous P0340 Code....(Camshaft Pos. Sensor)
Posted by shazow1969, Jan-09-06 03:01 PM
Crank Position Sensor. Inspect and replace.
-Kevin
|
95688, RE: Continuous P0340 Code....(Camshaft Pos. Sensor)
Posted by Bigtymr1021, Jan-12-06 01:03 PM
Originally posted by shazow1969
Crank Position Sensor. Inspect and replace. -Kevin
As said before...i have already done this
|