Hey guys. I searched for a while looking for something that would answer my question, but couldn't find a good response. I need 2+2=4. A list would be great.

At first I was going to do an engine swap, but with all those posts here, I decided my best route would be taking note of that you stated in other posts, rebuilding the engine and upgrading as needed for a turbo inclusion.

So, my question is this: Other than what is included in a "Rebuild Kit", what things should I buy if I am going to get a turbo kit later on?

I want to take advantage of the engine being rebuilt and have the parts for, whatever needs to be done, to include a turbo placement in my car later on.

**My Car: 1997 Eagle Talon ESi, 420A with 200,xxx miles on original engine.**

Those that know, thank you in advance for your help, and although I'm a "n oo b": flamers can burn to dust.

http://www.howellautomotive.com/Howell/Store/catalog/catalog/product_info.php?cPath=142_38_174&products_id=1439

Master Performance Engine Rebuild Kit 2.0 420A $2,049.95

That kit will do both the top and bottom end. Most here go with just the bottom end since our top end is pretty stout. This is the kit I bought. You will need to buy a few gaskets thermostat, intake set head gasket if you go with the below kit. You will also need to get a bunch of different sealants.

http://www.howellautomotive.com/Howell/Store/catalog/catalog/product_info.php?cPath=142_38_174&products_id=870


Here is the master sealant thread.

http://forums.2gnt.com/dcboard.php?az=show_topic&forum=5&topic_id=74726

Thank you guys very much.

The info is great. I hope I get to the level where I can also contribute help to others too. Thanx!

Originally posted by igounfazed
Thank you guys very much. The info is great. I hope I get to the level where I can also contribute help to others too. Thanx!

No you don't. Then you would flame the knobs and burn to dust. :)

wow. 4 posts in and he's already abusing the html tagging. I see wonderful things in our future...

dont forget fuel mods and a good clutch :)

i just got a spec stage 3; real nice clutch to go with IMO

Originally posted by .bs0d
i just got a spec stage 3; real nice clutch to go with IMO

thats what i used in my winter rebuild and i just got the 400 mile break in on it. real nixe so far, grabs great, no slipping. i dont like the chatter though, but hell, i can deal with it. good quality clutch IMO. i also did the neon tranny swap too and i like the longer gear ratio as well!

I am not

abusing

the

html

code !!
until now. thanks

Originally posted by igounfazed
I am not

abusing

the

html

code !! until now. thanks

You ruin this for the rest of us, and you will not enjoy your time here. :squint

Originally posted by DR1665

Originally posted by igounfazed I am not

abusing

the

html

code !! until now. thanks

You ruin this for the rest of us, and you will not enjoy your time here. :squint

ditto we can make life very much like hell if you piss us off!