| Go back to previous topic | | Forum name | Performance/Engine | | Topic subject | Top-End Torque Specs Needed! | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=90850 |
90850, Top-End Torque Specs Needed!
Posted by JWoodley, Jun-23-05 05:54 AM
I need torque specs for:
intake manifold -
exhaust manifold -
cam caps -
cam gears -
valve cover -
Thanks guys!
|
90852, RE: Top-End Torque Specs Needed!
Posted by JWoodley, Jun-23-05 06:02 AM
http://www.nochoads.org/files is down. =(
|
90862, RE: Top-End Torque Specs Needed!
Posted by JWoodley, Jun-23-05 09:33 AM
i know someone has the FSM laying around. who wants to be the man of the hour? Dino, you know you're near the keyboard.
|
90863, RE: Top-End Torque Specs Needed!
Posted by gilee_8, Jun-23-05 10:04 AM
Originally posted by JWoodley
I need torque specs for: intake manifold - exhaust manifold - cam caps - cam gears - valve cover - Thanks guys!
Intake manifold air temperature sensor: 7Nm, 5ftlb
Manifold absolute pressure sensor: 2Nm, 1.4ftlb
Intake manifold: 23Nm, 17ftlb
Exhaust Manifold: 23Nm, 17ftlb
Cam caps: #2,3,4,5 = 12Nm,9ftlb #1,6 = 28Nm,20ftlb
Cam Gear: don't know
Valve Cover: 12Nm,9ftlb
Hope that helps.
Gil
Edit: just found the details on the cam gears. sorry about before.
Cam gears: 101Nm, 73ftlb
|
90865, RE: Top-End Torque Specs Needed!
Posted by Scandelous, Jun-23-05 10:11 AM
Originally posted by JWoodley
I need torque specs for: intake manifold - exhaust manifold - cam caps - cam gears - valve cover - Thanks guys!
intake manifold: 17 ft-lbs
exhaust manifold: 17 ft-lbs
cam caps: 21 ft-lbs (outer bearing caps), 107 inch-lbs (inner bearing caps)
cam gears: 75 ft-lbs
valve cover: step 1: 40 inch-lbs
step 2: 80 inch-lbs
step 3: 107 inch-lbs
Hope this helps. All information taken from Haynes Repair manual.
|
90902, RE: Top-End Torque Specs Needed!
Posted by JWoodley, Jun-25-05 11:14 AM
Thanks guys. Much appreciated!
| |