Go back to previous topic
Forum namePerformance/Engine
Topic subject420a REBUILD HELP
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=90576
90576, 420a REBUILD HELP
Posted by Artago, Jun-15-05 12:02 PM
Hi,all. I wanna do a bottom end rebuild of my 420a so I can go turbo. However, I could use a hand from those of you who have done it already. I just need to know what parts to buy (manufacturers and specs), I need to know about any pitfalls, the best place to get this stuff, you know stuff like that. I would appreciate any suggestions. Thanks.
90577, RE: 420a REBUILD HELP
Posted by turbo8u, Jun-15-05 12:13 PM
use the search
90578, RE: 420a REBUILD HELP
Posted by eclipsekaiser, Jun-15-05 12:44 PM
Josh you A-hole...:P

Use the search function and look for Howell Automotive. They have assembled a bottom end kit with turbo users in mind. I would recommend ditching the provided rings (or obtain credit) and go with rings from the piston manufacture.
90579, RE: 420a REBUILD HELP
Posted by DR1665, Jun-15-05 12:57 PM
Haha. :+

I would also recommend contacting Exile Racing up in the Chicago Area. I don't know so much about buying engine components from Howell and I'm sure they're a quality operation, but I can tell you from experience that the guys at ERT will take a good amount of time to talk with you on the phone about what your goals are before they recommend anything from their catalogue. These two are the major players in our community as far as I'm concerned.

You just need to give serious thought to what you want your car to do when you're done. Be realistic about how you drive the car the most and then do some research here on what works and what doesn't. You'll get the hang of it. :thumbsup
90594, RE: 420a REBUILD HELP
Posted by rucr8z2, Jun-15-05 04:47 PM
Also search for Race Engineering they offer plenty of piston and rod combo's along with gaskets and bearings for cheaper.


Star Stage II,Vecco SS heatshield,OBX intake,OBX fuelrail,MSD coil & wires,Epac voltage sys.,Hyperground sys.,Eagle rods,JE pistons,ARP studs,meling oil pump(Ceramic coated DP,wastegate tube,Manifold & turbo housing)
90681, RE: 420a REBUILD HELP
Posted by rs-pssst, Jun-18-05 06:49 PM
New pistons -JE 0.020 over, eagle rods, JE rings for starters.

Oil pump, water pump.

Get the block looked over by a machine shop.

www.partsdinosaur.com for

rob bearings, main bearings, even valves, and all gaskets and timing components.

Get the sealants -Anerobic and RTV.
90683, RE: 420a REBUILD HELP
Posted by RxR_Eclipse, Jun-18-05 07:21 PM
howell is good for selling kits for a good price, but they take FOREVER to send it. If you can get all the same parts from someone else and they can get it to you in less than 2 months then get it from someone else. Howell just takes too long.
90706, RE: 420a REBUILD HELP
Posted by Max-Eclipse, Jun-19-05 03:11 PM
http://www.slowboyracing.com

they have a lot of the stuff you will need...