i have search and have had no luck...well toaday after running 10lbs of boost(built bottom end)my oil light keeps on blinking when i'm driving.if i'm at idel it does not blink but if i accelerate it keeps on blinking..i checked all my fluid and oil and everything seems fine.i'm not sure whats causing this so any info would be greatful.

whats your oil pressure at? sometimes it will blink if there is too much clearance with your rod bearings or mains.

at idel my oil pressure is at 20-25 but if i'm driving its aroung 55-60.

could have blown the sending unit out. when mine backed off the threads a little bit i had a somewhat similar problem. Might want to check to see if the connector is plugged in and also that its torqued down pretty tight.

Originally posted by midnitetill678
could have blown the sending unit out. when mine backed off the threads a little bit i had a somewhat similar problem. Might want to check to see if the connector is plugged in and also that its torqued down pretty tight.

i hope thats what it is cuz i been doing a lil more searching and i hope my rod bearings didn't go to shit...i did hear something hit underneath my car when i was boosting about 9-10lbs.i figured it was road debree..i will check that out but i'm getting a lil worried cuz i just got my motor rebuilt like 8 monthes ago with the howell long rod kit..