thats right people, the stage 4 kit for the srt-4 is coming out from mopar. 400 some odd hp, 430+ lb/ft of torque...

stock internals

hey dino, remember that bet we made? lol

just to let any of you potential swappers know, the stock pistons and rods are STOUT. the rings are the weak spots, and this is coming straight from the mouth of a chrysler technician.

HMMM swap HRMMMMMM is it possible?

i tore apart an srt motor yesterday, pistons look fine. As for the rods, they are the shittiest excuse for forged rods i have ever seen. They are powder forged, which is the lowest level possible. and as for dodge saying they are so great, the owner of the cars uncle works at the plant they make srt's, he calls them toothpicks.

Originally posted by SILVERNT
i tore apart an srt motor yesterday, pistons look fine. As for the rods, they are the shittiest excuse for forged rods i have ever seen. They are powder forged, which is the lowest level possible. and as for dodge saying they are so great, the owner of the cars uncle works at the plant they make srt's, he calls them toothpicks.

if they can make 400 and some odd horsepower they can't be that bad...

That is 400hp under WARRANY!
Nick
97RS

Originally posted by Collente
That is 400hp under WARRANY!

It's actually not. :thumbsdown

Originally posted by Collente
That is 400hp under WARRANY! Nick 97RS

show me one damaged srt4 that hasnt given the finger by a dodge tech.

chris is 100% correct....

jake was saying he's seen more srt-4's at the shop (chrysler) for rebuilds because of bent rods then he wants to count.

best bet, get them shot peened and cryotreated

Originally posted by turbo8u
chris is 100% correct.... jake was saying he's seen more srt-4's at the shop (chrysler) for rebuilds because of bent rods then he wants to count. best bet, get them shot peened and cryotreated

i dont even think that would do it, just get crowers

Originally posted by SILVERNT

Originally posted by turbo8u chris is 100% correct.... jake was saying he's seen more srt-4's at the shop (chrysler) for rebuilds because of bent rods then he wants to count. best bet, get them shot peened and cryotreated

i dont even think that would do it, just get crowers

i think it would...

or shit, just get the old t2 rods and get those shot peened and cryoed

Originally posted by turbo8u

Originally posted by SILVERNT

Originally posted by turbo8u chris is 100% correct.... jake was saying he's seen more srt-4's at the shop (chrysler) for rebuilds because of bent rods then he wants to count. best bet, get them shot peened and cryotreated

i dont even think that would do it, just get crowers

i think it would... or shit, just get the old t2 rods and get those shot peened and cryoed

T2 rods, yes, srt4, no. shittiest excuse for rods ever

Originally posted by SILVERNT
T2 rods, yes, srt4, no. shittiest excuse for rods ever

why would mopar even use the rods if they had 500hp capable rods for like 15 years already?

beats me

cuz the TII rods havent been made since 1992? prolly trashed the tooling

MY DEALER WILL WARRENTY IT IF ITS DONE BY US..... the kit however runs about 8500$ not including install..... add about 16hrs to that at 75$ and hour..... and youll get ur warrenty lol
catch is that u have to have all your maintance done at the same dealer... including oilchanges , coolant flushes ect.
it adds up.


02:19:18pm DarkOne> They'd have had to brought a whole fucking JUG of KY.
02:19:28pm InFiNiT3> lol no shit
02:19:39pm DarkOne> and a funnel.
02:19:45pm grain> have to get the ky with warming
02:20:00pm InFiNiT3> i feel sorry for the 18 y/o (one was 17 one 18) his name was plaster'd all over the news n news paper
02:20:06pm DarkOne> Yeah, has to be warming.
02:20:06pm BuckNutty> jus spit on it and it'll go in
02:20:17pm InFiNiT3> aye the ky w/ warming any good>
02:20:45pm grain> never tryed it
02:20:50pm grain> i applyed for a sample on thier website
02:20:56pm BuckNutty> evan didn't complain any
02:20:56pm BuckNutty> it felt nice
02:20:57pm InFiNiT3> lol
02:21:01pm grain> i use id glide whne she dries
02:21:06pm grain> good stuff
02:21:45pm InFiNiT3> thnx for the new sig guys
02:21:45pm DarkOne> Are we still talking about fucking dead chicks?

Originally posted by eclipse_99rs
HMMM swap HRMMMMMM is it possible?

yes swap your car for a srt-4 and give $28,000 more to the dealer

Alain

Canadians cant live with em cant shoot em :P

My next car will be a black SRT. :drool
~Jeffo


Hey, have you seen my tail lights? Yeah, well get used to looking at them.