| Go back to previous topic |
| Forum name | Performance/Engine |
| Topic subject | The CORRECT Crank Bolt Size |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=88649 |
88649, The CORRECT Crank Bolt Size
Posted by UpToSpeed, Apr-24-05 06:40 AM
I just wanted to post this up if anyone is searching... Before doing my install I did a search for the correct long bolt size so I could order it. What I found on the boards is 12mm x 1.50 ... this is NOT correct... It'll thread in but you'll f'up your crank. I had to retap the hole :\
SO, the correct size for that crank pulley bolt if you're taking it off or installing a UDP or whatever is:
12mm x 1.75 ... You can use a 120mm long bolt to pull with.
Just didn't want anyone to go through the horrors that it did.
|
88650, RE: The CORRECT Crank Bolt Size
Posted by scirio, Apr-24-05 08:46 AM
Thanks, I'm going to go check mine right now. I had to replace it with something else when mine broke.
|