I have been searching for the past half hour and Ive got the shits of it. All I need is the torqueing sequence, torques, and what to repeat on installing the headbolts. I guess Im just not putting in the right keywords, lol. I know I have seen somebody post it on here before but Im having no luck. So if somebody can just help me or give a link, that would be great.

Thanx guys
DJ

You start form the middle and work your way out. You will want to use a 3 step torqing method. I.E. 25lb 45lb 65lb. The torque depends on the bolts/studs being used.

best time so far 14.3 @ 101.1mph(no traction)
www.cnnmotorsports.com

Im using OEM bolts.

Originally posted by DJ420a
Im using OEM bolts.

You might want to peruse through this document for what you're lookin for:
http://www.2gnt.com/2gnt_420a_overhaul.pdf :thumbsup

Originally posted by lgjhn

Originally posted by DJ420a Im using OEM bolts.

You might want to peruse through this document for what you're lookin for: http://www.2gnt.com/2gnt_420a_overhaul.pdf :thumbsup

Buy a chiltons too.

Originally posted by a_miller_76

Originally posted by lgjhn

Originally posted by DJ420a Im using OEM bolts.

You might want to peruse through this document for what you're lookin for: http://www.2gnt.com/2gnt_420a_overhaul.pdf :thumbsup

Buy a chiltons too.

Aw crap, it says it in there? Woops, I havent looked at that thing in so long, I forgot I had it, lol. The link lgjhn gave is exactly what IM lookin for.

Thanx a bunch guys