| Go back to previous topic | | Forum name | Performance/Engine | | Topic subject | bore, port&polish | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=8690 |
8690, bore, port&polish
Posted by fast_ass_gs, Oct-12-01 07:21 PM
Hey I want to get my t-bodey bore,and my intake manifold ported
and polished.I found a guy to do it is there anything I should know before I get it done?What about the air flow sensor?
|
8691, RE: bore, port&polish
Posted by BlackVenge, Oct-12-01 07:25 PM
read further down the topic list. there is a post i just read about it. think it was port and polish the tb and plenum for 88 bucks. not sure it was a while ago that i read it.
|
8692, RE: bore, port&polish
Posted by Fast420A, Oct-12-01 07:47 PM
LAST EDITED ON 13-Oct-01 AT 00:49 AM (PST)oops
|
8693, RE: bore, port&polish
Posted by Fast420A, Oct-12-01 07:47 PM
LAST EDITED ON 13-Oct-01 AT 00:48 AM (PST) look back in the previous posts in the temporary forum. I posted a LONG bit of info about P&P about 2 weeks ago.
Once the board gets fixed and we have the other forums back and the archives back, Everyone needs to run some searches because there is a LOT of info in older posts.
http://hometown.aol.com/ohshootuhh/
All Motor Beast in need of MAJOR TUNING
Perf:
KYB AGX Struts
Neuspeed Sport Springs
5 Strut Bars (2 F/U, F/L, R/U, R/L)
Sprint Front Camber Kit
$15 Rear Camber Kit
MSD DIS-2 Ignition System
Some Regrind Cams that need High Compression (which I don't have)
Ported Intake Manifold
Ported Throttle Body
Nameless Cold Air Intake with a K&N Filter
Custom 2 1/2 inch exhaust with Dual DTM Muffler
Empty Catalytic Convertor
Energy Suspension Motor Mount inserts
Hurricane_GS Short Shifter
Symborsky Shift Kit
Clutchmasters Stage 3 Modular
225/50/16inch Wheels and Tires
Audio:
Alpine CD Head Unit
Alpine Flex4 25W X 4 for Fronts and Rears
Alpine V-12 450W X 1 for Subs
Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears
Blaupunkt 3 way 6x9's in the rears
3 MTX 5000 10" 12 ohm subs running 4 ohms mono
|
8694, RE: bore, port&polish
Posted by 1TuffRS, Oct-12-01 11:29 PM
You know it would be a lot easier if there was a search engine for the archives. I dont know if its possible, but it would make it less tempting for guys to post unnecessary messages in this forum
-Toney
'97 RS
GST exhaust, modded intake w/ k&n, axxis pads
Rockford Fosgate MP3 Player
|
8695, RE: bore, port&polish
Posted by EvuLFleA, Oct-13-01 04:55 AM
There is.....Not sure if its working right now though. See the "Search" up there. Well yeah thats the search engine.
Still being designed but worth a look!
www.extreme420a.com
| |