| Go back to previous topic |
| Forum name | Performance/Engine |
| Topic subject | Adapting AN fittings onto fuel pump feed/return hard lines |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=86503 |
86503, Adapting AN fittings onto fuel pump feed/return hard lines
Posted by dougie2, Feb-27-05 05:00 PM
Has anyone installed AN fittings onto the fuel feed and return hard lines coming off the fuel tank plate? How'd you do it? Any pics, suggestions, advise would be appreciated.
|
86506, RE: Adapting AN fittings onto fuel pump feed/return hard lines
Posted by Star Turbo Talon, Feb-27-05 05:14 PM
you have to weld, actually braze them onto the plate. "MetalJim" has done it.
Terry
|
86536, RE: Adapting AN fittings onto fuel pump feed/return hard lines
Posted by grain, Feb-28-05 11:56 AM
i know the fuel return line fits fine with an -6an. i added some teflon paste to be sure. dunno about the feed line. but id assume it would be the same.
|
86714, RE: Adapting AN fittings onto fuel pump feed/return hard lines
Posted by Dirty, Mar-06-05 05:04 AM
MetalJim did it. Look at his 8 inj. post, he has pics.
|