Man it's been a long time since I posted here...

Seems like the horn is in the way of my AEM Airfilter on the intake, this means i can't adjust the intake so that the bracket will screw on. In the instructions it says that some models may need to adjust a bolt to move the horn out of the way, but I'm not sure which bolt, and it's hard to see up in there. I thought before I rack my brain too much trying to see/find the bolt I would ask if anyone else had this problem, and which bolt it is?

Thanks guys!

I just bent the horn bracket out of the way when I had my CAI on

theres a crossbolt in the middle of the horn, loosten it, pivot the horn, tighten, done

Mine was rusted to shit and was just going to break off so I just drilled another hole for it a few inches back and bolted it there.

just bend it outta the way

i never had a problem :shrug

Originally posted by talonguy2005
i never had a problem :shrug

I thought it was on the other side :shrug

Think I actually took it off and moved it to a different bolt to the side of it....same difference.

my horn is by the evap canister :shrug

i wanna get an air horn :)

Originally posted by MCubed45
my horn is by the evap canister :shrug i wanna get an air horn :)

my buddies' got a horn that plays 'Dixxie'

Do like whats his name said and loosen the nut, push the horn up, and tighten it. You have then bent/drilled/broke nothing, and can go back at anytime.

Originally posted by MCubed45
my horn is by the evap canister :shrug i wanna get an air horn :)

i knew I wasn't crazy. must be a 95 thing.

I say just pull that stupid thing off. better to rev at the idiot in front of you than use that Bambi honker. it get's them going just as fast, and they seem to be scared of you too = bonus