| Go back to previous topic |
| Forum name | Performance/Engine |
| Topic subject | Motor Studders when held to the floor. |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=84028 |
84028, Motor Studders when held to the floor.
Posted by royprue, Dec-29-04 11:21 AM
MY MOTOR STUDDERS REALLY BAD WHEN I HOLD IT TO THE FLOOR. IT IS ALMOST LIKE A PLUGGED CAT, CAUSE IT DOSENT IDLE GOOD AND NOW AND THEN IT PUFFS OUT THE EXHAUST. BUT I DONT KNOW IF IT IS THAT OR THE IGNITION SYSTEM. IT HAS NEW PLUGS AND A NEW MUFFLER. cOULD YOU HELP ME OUT BEFORE I SPEND TOO MUCH MONEY TRYING TO FIX IT. THANKS.
|
84037, RE: Motor Studders when held to the floor.
Posted by ajcfalcon, Dec-29-04 03:01 PM
i would first check out the ignition system.... you say it has new plugs, so try new wires and/or new coil pack. get the obvious things out of the way before you "spend too much money"
|
84038, RE: Motor Studders when held to the floor.
Posted by ForceFed, Dec-29-04 03:02 PM
Gap the spark plugs accordingly. Take Care.
|
84095, RE: Motor Studders when held to the floor.
Posted by royprue, Dec-30-04 09:16 AM
The plugs are gapped right. is there a way to test the coil with an ohm meeter?
|
84126, RE: Motor Studders when held to the floor.
Posted by Blizare, Dec-30-04 06:06 PM
if you search you will find . newb
|
84170, RE: Motor Studders when held to the floor.
Posted by 95_ESi_Person, Jan-01-05 02:33 AM
plugs, wires, then coil. do you have oil in the spark plug wells? if so try replacing the o-rings underneath the VC.
|