Go back to previous topic
Forum namePerformance/Engine
Topic subjectGuys who posted to "F**king idle", try this and see what you get
Topic URLhttps://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=8358
8358, Guys who posted to "F**king idle", try this and see what you get
Posted by tim97rs, Oct-04-01 07:04 AM
On a hill, let your car coast down without touching your clutch or gas, with engine running of course, see if your idle goes up and post back...
mine gradualy went up as speed increased, let me know...
thanks

http://my97rs.homestead.com/mywebpage.html

I refuse to tip-toe through life gently, only to arrive at death safely!

97 RS
Custom CAI
AF/X UDP
Bored TB-55mm
GS-T exhaust
"Super Good" plug wires
Front & Rear upper strut bars
Rear lower Stablizer bar
Front RRE lower Tie bar
Eibach Sportline Springs
Tokico shocks
Powerslot Rotors
S/S braided brake lines
Axxis Metal master pads
17" Focal Type 161's w/ Z-rated rubber
Stock shifter shortened 1.25in
Energy Suspension Shifter bushings
Custom shift plate(no more shift boot)
Indiglos
Grillcraft 3-pc. grill
V-Tech Taillight covers
Coming soon: AFC, EGT, A/F meter install, Pacesetter ceramic coated headers, 2.5" full exhaust pipeing
8359, RE: Guys who posted to "F**king idle", try this and see what you get
Posted by whodatt1, Oct-04-01 07:16 AM
damn!! no damn hills here in madison!!! hehehe


Whodatt1
97gs

8360, RE: Guys who posted to "F**king idle", try this and see what you get
Posted by XtremeRS, Oct-04-01 08:27 AM
I tested my car today about this, and i only have a CAI. When coming to a stop,pushing in the clutch, the rpms are at about 1200. when i get stopped, they drop to 900 and stay there. It doesnt go up and down, just even like i said. I think this is normal for the car because the ecu is still getting a reading from the vehicle speed sensor. I think someone else had mentioned this on a post, but maybe it does this to compenstate if you need to put back in gear real quick to make a smooth trans shift. just my thoughts...

Matt's 98 RS 5spd
custom shifter(cut&weld meself)
symborski shift kit
window tint
2700 watt system
15" aluminum Eclipse sub
custom pvc CAI
Dis is jus da beginin!


"sweeettt"
8361, RE: Guys who posted to "F**king idle", try this and see what you get
Posted by Jen, Oct-04-01 08:47 AM
My car used to do that all the time. It would rev up in neutral rolling down a hill (with the clutch out) and very slowly go back down. Also, as soon as I pushed the clutch in (at the stop sign on the bottom of the hill) it would go up again to like 3k rpms and it would take forever to go back to normal. It also did other strange things like revving up by itself just sitting at idle. I never did anything to really fix it. The only thing I did was changing the head gasket around the time it quit doing it... Not much help... sorry...

Jenni & Cody
'95 Talon Esi
'90 Talon TSi AWD (11.52 sec)
'91 Eclipse GSX (14.22 sec, the Beater...)
'91 Eclipse GSX



8362, RE: Guys who posted to "F**king idle", try this and see what you get
Posted by SEA97GS, Oct-04-01 10:30 AM
This has to do with the brake booster. When you have the clutch in or are coasting, the vacuum to the brakes disappears. The only way to compensate for this is a higher idle to have some power for the brakes to use.

Granted, 3k RPMs is overkill, and there is something else going on, but it's completely normal for the "idle" to go that high while coasting.

I don't really think I explained that all too well, but hopefully you understand the thought behind it.

SEA97GS - 15.785@88.20MPH
NW.DSM.ORG
HotShot Headers-Custom 2.5" exhaust-IceMan full stack intake-MSD 8.5mm Superconductor plug wires-NGK "6" Plugs-Nitto NT555R Drag Radials on 3G RX-7 wheels-Eibach ProKit Springs-Tokico shocks-front and rear upper STB-AFX UDP-Crower Cams
8363, RE: Guys who posted to "F**king idle", try this and see what you get
Posted by XtremeRS, Oct-04-01 11:45 AM
Hmmm.. that doesn't make sense to me because if that were the case, then there wouldn't be any brake boost at idle when stopped. I believe(correct me if i'm wrong)that the vac hose to the booster is after the throttle plate, so it doesn't matter if you are at no throttle or part throttle...yes????? anyone???

Matt's 98 RS 5spd
custom shifter(cut&weld meself)
symborski shift kit
window tint
2700 watt system
15" aluminum Eclipse sub
custom pvc CAI
Dis is jus da beginin!


"sweeettt"