| Go back to previous topic |
| Forum name | Performance/Engine |
| Topic subject | NEED to know the threading for the 12v pole on the starter |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=83254 |
83254, NEED to know the threading for the 12v pole on the starter
Posted by turbo8u, Dec-07-04 05:48 AM
if you have a spare can you check the threading and size? like 12mm 1.75 pitch? i really need to know if you're up for helping me out.
its the nut on the 12v wire to the starter, its an eye loop and it hooks over the pole, its covered by a red shielding rubber peice
TIA
|
83255, RE: NEED to know the threading for the 12v pole on the starter
Posted by ner947, Dec-07-04 05:51 AM
M12x1.75 sounds a little big. I lost the nut for this thing once and I had to take the starter off and bring the it to the hardware store and I kept testing nuts until I found one that fit. If I had to guess, I'd call it an M10x1.5.
|
83256, RE: NEED to know the threading for the 12v pole on the starter
Posted by turbo8u, Dec-07-04 05:56 AM
Originally posted by ner947
M12x1.75 sounds a little big. I lost the nut for this thing once and I had to take the starter off and bring the it to the hardware store and I kept testing nuts until I found one that fit. If I had to guess, I'd call it an M10x1.5.
cool, yea i was just taking a stab in the dark with m12 :P that does sound pretty big. i'll try m10x1.75 and 1.5
thanks nate :cheers
|
83263, RE: NEED to know the threading for the 12v pole on the starter
Posted by turbo8u, Dec-07-04 12:52 PM
ok the pitch is 1.25 size is 8mm i'll confirm tonight, the pitch is correct though
|
83370, RE: NEED to know the threading for the 12v pole on the starter
Posted by turbo8u, Dec-10-04 03:45 PM
8mm x 1.25
|