Hi, I'm currently trying to install an s-afc 2 and i was wondering a few things. during my install i had problems locating the rpm signal and the ground. sounds stupid,i know. the install guide says for the rpm it's a white wire on the lower connector, i find white w/ green, blue, and red stripes; also a white w/ brown hash marks about an inch apart, but no straight white wire(could it be this one?).
also on the ground the install guide says its the upper connector with a black wire, i found a black wire near the power wire with 2 hashes close together on it, slightly oversized(i think), is this one it?. if anyone can help me please let me know. i drive a 1997 Eclipse GS non-turbo so the install guide should work.

Thanks, Cyrus

Originally posted by Cyrus
Hi, I'm currently trying to install an s-afc 2 and i was wondering a few things. during my install i had problems locating the rpm signal and the ground. sounds stupid,i know. the install guide says for the rpm it's a white wire on the lower connector, i find white w/ green, blue, and red stripes; also a white w/ brown hash marks about an inch apart, but no straight white wire(could it be this one?). also on the ground the install guide says its the upper connector with a black wire, i found a black wire near the power wire with 2 hashes close together on it, slightly oversized(i think), is this one it?. if anyone can help me please let me know. i drive a 1997 Eclipse GS non-turbo so the install guide should work. Thanks, Cyrus

I think i remember when i installed mine that there were hashes on the wires that needed to be used too. so i just ignored them. but im not positive and i cant go check cuz im on vacation right now, so maybe someone else can confirm.

Anyone know??

Originally posted by Cyrus
Anyone know??

It's the hashed one. Only non-striped wire in the harness.

Cool, I'll try it for both then. Thanks.

Cyrus

the ground for the afc on my 97 is on the top connector, correct??

Cyrus

Originally posted by Cyrus
the ground for the afc on my 97 is on the top connector, correct?? Cyrus

yes every wire you tap is on the upper harness with the exception for the tach wire.