http://www.jegs.com/cgi-bin/ncommerce3/ProductDisplay?prrfnbr=4114&prmenbr=361

And here are the details with the part number.

110-150126
26 lbs/hr (each)

$36.99


Anyway, will these work on our cars? There tech support is not answering me.

Your question is lacking details. Are you asking if they will fit the intake, and/or work electrically?

Description states they are high impedance therefore yes they will work electrically without a resistor pack. low impedance and high impedance will work the difference is one requires the use of a resistor pack.

As far a physical fit i am not sure, IF the picture is accurate then yes they will fit, if it is not the same exact injector in the picture then there is no way to tell.

Terry

But what about that application guide? Our motor isn't on there. It was tough to tell from the picture, since it didn't look like it got narrow enough.

do a search and find out how many peopelhave installed mustang or f-body injectors in their cars. Summit and Jegs list the applications because sales for those cars are much higher than ours.

Terry

Cool. I just wanted to make sure. THe reason I aske if they fit, even though it doesn't say on the application guide is that I know that summit sells accells too, and they share the same part numbers. So logic suggest that they are the same.