Anyone know where I can get a stock oil pan? Also, does anyone make an aftermarket oil pan besides a custom one from Moroso? My pan kinda has a dent in it and is making me a little nervous.

I had the official WRC oil pan on my 2GNT for the longest time and didn't worry about it. Every once in awhile you'll find a stocker in the For Sale section....other then that...Satan or a salvage yard.

Originally posted by powellds
Anyone know where I can get a stock oil pan? Also, does anyone make an aftermarket oil pan besides a custom one from Moroso? My pan kinda has a dent in it and is making me a little nervous.

Why? The pickup has protrusions on the bottom of it to prevent it from laying flat on the bottom of that pan. if it makes you that nervous, drop the pan and hammer the dent back out. Cheaper than paying $100 for a new pan from Satan.

In the event that you don't want to hammer it out, which I think is your best bet, I have one from a neon if it'll work?

Originally posted by cougar694u
I have one from a neon if it'll work?

Different pan. Won't fit with our exhaust and centermember.

I have a small dent in mine too.

Man, dont buy another, just bang it out, thats what I did. Just pull it off and get like a 2X2 piece of lumber and round off the corners. Then get a mallet and have at it. I dented the whole bottom of mine, then I wised up, got rid of the coilovers and bought some Eibachs. This is how mine turned out.

apparently it's bad to have a dent? I would think it would have no effect on the car..

Just pound the dent out like mentioned above. I've done it to two pans without issue.

Corbin

'95 ESI-T
Now with more power and fewer leaks



Gimme fuel...Gimme fire...Gimme that which I desire

Originally posted by DJ420a
Man, dont buy another, just bang it out, thats what I did. Just pull it off and get like a 2X2 piece of lumber and round off the corners. Then get a mallet and have at it. I dented the whole bottom of mine, then I wised up, got rid of the coilovers and bought some Eibachs. This is how mine turned out.

that's purty

Originally posted by wite96gs
that's purty

Nice downpipe? :scratch

Yeah, that soemthing Im testing out, I think it'll pass inspection. My mechanic is blind,lol. No really, thats when I was workin on the DP. Its connected now, I promise. :thumbsup

ill sell ya one for 40 shipped.

Originally posted by wite96gs

Originally posted by DJ420a Man, dont buy another, just bang it out, thats what I did. Just pull it off and get like a 2X2 piece of lumber and round off the corners. Then get a mallet and have at it. I dented the whole bottom of mine, then I wised up, got rid of the coilovers and bought some Eibachs. This is how mine turned out.

that's purty

yes I suggest just taking it off and pounding it out, while your at it you can install a crank scraper too hehe. You might want to install a flex section on that downpipe since its still in pieces.