I purchased a head from EAGLE 5 about 4 months ago and finally got it a couple weeks ago. Not his fault Energy Heaqds are a bunch of assholes. Any way I am ready to put the head in and I have no cam caps(should have realized earlier). There is a lot of money in this head so should I use my old caps or just ?. I have no idea.

TIA


98 GS
HRC Stage II
14.852@94.43
http://members.cardomain.com/lonnie1977

You're fucked. Cams caps are not replaceable - they come with the head and are not interchangable. if you don't have any cam caps on that head, throw it away, because it's junk now.

I sure hope Eagle 5 still has those cam caps.


Built shortblock 8.8:1 CP pistons, Eagle Rods
Built head w/ P&P by ERT
GST Muffler
injen short ram intake
magnecore 8.5mm wires
EGR removal/blockoff
front/rear strut tower bars
GSX dual piston calipers
High stall torque converter, Trans cooler, remote filter

Me too


98 GS
HRC Stage II
14.852@94.43
http://members.cardomain.com/lonnie1977

Originally posted by DarkOne
You're fucked. Cams caps are not replaceable - they come with the head and are not interchangable. if you don't have any cam caps on that head, throw it away, because it's junk now.

yea, i learned that the hard way.

Just got off the phone with Energy Heads and it lookis like i'll be looking for a gooooood machine shop to get a line bore done on the cam caps. I have an extra set of caps around. I hate buying shit over the internet. I'll be doing the line bore because this had has a full race port, SS valves, crower springs, the whole nine. Thanks guy!


98 GS
HRC Stage II
14.852@94.43
http://members.cardomain.com/lonnie1977