| Go back to previous topic | |
| Forum name | Performance/Engine |
| Topic subject | What do I set corwer 2's at on the cam gears? |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=82074 |
|
82074, What do I set corwer 2's at on the cam gears? Posted by powellds, Oct-21-04 04:55 PM Hi, I recently replaced my whole top end with goodies and was just wondering what I should set my Crower 2's at on the cam gears. Should I advance or retard the timing on the intake. I know to leave the exhaust alone, but the car just has no power right now. | |
|
82076, RE: What do I set corwer 2's at on the cam gears? Posted by powellds, Oct-21-04 05:18 PM anybody.........? Help me out. | |
|
82077, RE: What do I set corwer 2's at on the cam gears? Posted by djtrickee, Oct-21-04 05:19 PM 10 minutes later?? dude. give it a little time... or a lot of time. | |
|
82080, RE: What do I set corwer 2's at on the cam gears? Posted by DarkOne, Oct-21-04 05:44 PM Have you redlined it? Big lumpy cams move all the power up top. it'll feel slow as shit below 2000RPM. | |
|
82086, RE: What do I set corwer 2's at on the cam gears? Posted by MetalJim, Oct-21-04 07:23 PM Play around with it till it doesn't run, then turn it back a notch. Thats the sweet spot. | |
|
82090, RE: What do I set corwer 2's at on the cam gears? Posted by powellds, Oct-22-04 12:04 AM So retard the timing? How many degrees? | |
|
82092, RE: What do I set corwer 2's at on the cam gears? Posted by cougar694u, Oct-22-04 03:58 AM I ran mine (crane 12's) -4* all the time. You can retard just the exhaust cam, it won't hurt your torque quite as much, but if you retard them both, you'll get a little (2-3 hp maybe) up top. | |
