Alright help me figure this out. I have my Autometer EGT guage mounted above the heater controls where the vents were. If Im driving with no accesories on its fine. But if I have my lights on and I turn my heater blower on, it jumps everywhere. Same thing happens if I have my tunes cranked and I hit the brakes.


Now I know its a voltage problem. I thought I corrected it by running the main power wire into the acc. wire on the ignition, didnt work.

So what do you guys think? Could I run the power wire directly to the battery? Would it use enough voltage to kill the battery, or any other ideas would be greatly appreciated.

Thanx guys
DJ

Cmon guys, this thing is pissing me off!!

It's not properly grounded.

You think? Ok I will give it a try.

Thanx man

Well, I grounded it to the chasis and its still doing it. Is it possible that its doin it because I have Corbins A/F meter and the EGT's power wires and grouond wires spliced in with each other?

yes -- give it a really good power and ground. Dont share it with anything - it will solve the problem.

Originally posted by Ryan_Hes
yes -- give it a really good power and ground. Dont share it with anything - it will solve the problem.

unless your me and it still doesnt work :(