i went and ordered my obx header for 155+32(shipping) but now i want even more power and i dont plan to go turbo, so should i go for the intake manifold next? obx has one brand new for about 200 and i was wondering if its worth the 200 i want all the power i can get so 5-10 horses is worth 200 bucks to me.

our stock intake manifold is just as good if not better than an after market.

just get a 60mm throttle body and bore out the manifold..

also.. you wont get 5 to 10hp from an obx intake manifold.

as far as im concerned any aftermarket intake manifold doesn't do a thing for you.

Originally posted by siueclipse
our stock intake manifold is just as good if not better than an after market. just get a 60mm throttle body and bore out the manifold.. also.. you wont get 5 to 10hp from an obx intake manifold. as far as im concerned any aftermarket intake manifold doesn't do a thing for you.

what he said

Find a used stock intake mani on eBay or in the sale/wanted forum here and then send it to Eddy at www.fierroracing.com. He'll port it and gasket match it and all that good stuff for about $80 and shipping. It will more than likely out perform any aftermarket. You can see pics of my intake mani on his site to see what he does. Quality work by a master imo. :thumbsup

Originally posted by DR1665
Find a used stock intake mani on eBay or in the sale/wanted forum here and then send it to Eddy at www.fierroracing.com. He'll port it and gasket match it and all that good stuff for about $80 and shipping. It will more than likely out perform any aftermarket. You can see pics of my intake mani on his site to see what he does. Quality work by a master imo. :thumbsup

hey dr, how long does it take him to do this? also, does he polish them as well?

Originally posted by nightwolf2369

Originally posted by DR1665 Find a used stock intake mani on eBay or in the sale/wanted forum here and then send it to Eddy at www.fierroracing.com. He'll port it and gasket match it and all that good stuff for about $80 and shipping. It will more than likely out perform any aftermarket. You can see pics of my intake mani on his site to see what he does. Quality work by a master imo. :thumbsup

hey dr, how long does it take him to do this? also, does he polish them as well?

Check out eddys site and see for yourself. He does EXCELLENT work.


*rebuild in process...too much spent and still not fast enough*
GST Muffler
injen short ram intake
magnecore 8.5mm wires
EGR removal/blockoff
front/rear strut tower bars
GSX dual piston calipers

if you guys want, you can send me your manifolds and i will port and polish it. the throttle body and runners for $50 bux and you pay shipping.

well should I just do an enngine rebuild cause i want it llike brannd new ccause i got like 130k miles on it as it is. it runs cleean but latly nott ass cleann as usual. sorry bout th typing to this lptop keyboard blows

you got a UDP yet?
that will help out better than the intake will.
UR or AFX dosent matter just get one!

I think P&P ur intake mani will give u more gains then a udp.....thats with completely opening up both sides!!!!

Originally posted by siueclipse
if you guys want, you can send me your manifolds and i will port and polish it. the throttle body and runners for $50 bux and you pay shipping.

Can you port it too? I may be interested.

Originally posted by netrelik

Originally posted by siueclipse if you guys want, you can send me your manifolds and i will port and polish it. the throttle body and runners for $50 bux and you pay shipping.

Can you port it too? I may be interested.

yes

Originally posted by foggy45
you got a UDP yet? that will help out better than the intake will. UR or AFX dosent matter just get one!

I agree. Hey u know what? I have a Brand New Unorthodox UDP 4 Sale! You interested? :thumbsup



Main Mods:

Black Widow Front
Blitz Type II Sides
BuddyClub Rear
Sonic Blue Paint Job
OEM Carbon Fiber Hood
Fiberglass Dash
Fiberglass Headliner
Custom Door Panels
17" Chrome Arceo Eurostars
205/40/17 Ventus
Skunk 2 Coil-Overs
KYB AGX Shocks
Star Stage 1 Turbo Kit
NGK Plugs & Wires
Dual Tenzo Type 2 Exhaust
Front Strut Bar

Mods I have waiting install:

Trans-Go Shift Kit
AFX UDP
Apexi SAFC
400cc Injectors
Spearco FMIC 27x10x3
Greddy Type S BOV
Greddy Turbo Timer
Autometer Boost & Air/Fuel Gauge

Parts 4 Sale:

BRAND NEW Unorthodox UDP
Tenzo Type 2 Silencers
BRAND NEW FMIC 27x10x3
Used FMIC 22x8x2.5
White Greddy Turbo Timer W/ Instructions

Just Ask Q's & Make Offers HipHop615@yahoo.com