| Go back to previous topic |
| Forum name | Performance/Engine |
| Topic subject | 95 block |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=77111 |
77111, 95 block
Posted by Blitzclipse, Jul-05-04 06:52 PM
I have been looking for a 420a to rebuild, and I found a 95 avenger DOHC longblock for $100 (don't know if runs but turns over). Will I have any problems with it being a 95? Or, I have found a 96 SOHC Neon complete motor(runs) for $175. Which would be my best bet? Is this decent prices? Or, I might can get one cheaper at my friends junk yard. He was out of town, today.
|
77115, RE: 95 block
Posted by Star Turbo Talon, Jul-05-04 08:05 PM
If you dont go for the neon motor which is a great price mind you, send an email to Degree on this board. He has a bad crank/rod and needs a motor for as cheap as poss. He is hurting for cash right now.
Terry
96 Eagle talon ESI
Star Stage II - Boost/oil/EGT gauges
97 Eclipse
Greddy header/evo exhaust - SFMU/return line - Stage 2 6 puck Sprung hub MIBA clutch - Shortened shifter - Koni Yellows w/eibach prokit - Stillen Fr/Rr swaybars - ceramic intake - DEI Keyless entry alarm - Niche 17" Shoks
Waiting to be installed: Apexi AFC, HKS EVC IV, 450 Turbo injectors, GSX Front brakes (need rotors)
|
77116, RE: 95 block
Posted by Star Turbo Talon, Jul-05-04 08:06 PM
sorry to answer your question either sounds great for a rebuild.
Terry
96 Eagle talon ESI
Star Stage II - Boost/oil/EGT gauges
97 Eclipse
Greddy header/evo exhaust - SFMU/return line - Stage 2 6 puck Sprung hub MIBA clutch - Shortened shifter - Koni Yellows w/eibach prokit - Stillen Fr/Rr swaybars - ceramic intake - DEI Keyless entry alarm - Niche 17" Shoks
Waiting to be installed: Apexi AFC, HKS EVC IV, 450 Turbo injectors, GSX Front brakes (need rotors)
|
77129, RE: 95 block
Posted by Corbin, Jul-06-04 06:15 AM
Here is a link to some differences:
http://www.tomorrowstechnician.com/tt/tt110238.htm
If you buy the '95, you will have to worry about getting the right main bearings. Something about the notches for the bearings being offset. Some people buy two sets of main bearings to compensate.
Corbin
'95 ESI-T
HRC+FMIC+ETC...
Gimme fuel...Gimme fire...Gimme that which I desire
|
77147, RE: 95 block
Posted by Uberingram, Jul-06-04 11:31 AM
Originally posted by Corbin
Something about the notches for the bearings being offset. Some people buy two sets of main bearings to compensate.
Yeeep. DR1665 had to do that when he put a 95 bottom end in Daisy. thedawg (i think) has a good picture floating around of this specific situation.
|
77148, RE: 95 block
Posted by grain, Jul-06-04 11:50 AM
if you search back in the board a little bit, they have the part numbers and shit for the '95 year blocks. and yes the main bearings are notched differently on the block then the '96+
|
77149, RE: 95 block
Posted by BlueMoonEclipse, Jul-06-04 11:52 AM
oh lookie lookie
Click the link....Scroll down to the picture
http://forums.2gnt.com/dcboard.php?az=show_topic&forum=5&topic_id=76774&mesg_id=76774&page=&topic_page=2
|