| Go back to previous topic | | Forum name | Performance/Engine | | Topic subject | Full polyureathane/solid pass side motor mounts | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=75410 |
75410, Full polyureathane/solid pass side motor mounts
Posted by rhui, May-31-04 02:14 PM
Who here is running these? How does the car feel? And more importantly where did you get yours?
Are the energy suspension motor mounts inserts enough for a high hp car? (Found @ http://www.turbotechracing.com/productcart/pc/viewPrd.asp?idcategory=204&idproduct=559)
I'd prefer the Prothane urathane mounts, but I can't seem to find a vendor that sells them for our cars (Front, rear, and sides).
Only other place is @ http://www.deyemeracing.com/ under 1995-1999 Avenger/Sebring Coupe. But this is going to be pricey @ $69usd/each mount.
TIA,
Ritchie.
|
75411, RE: Full polyureathane/solid pass side motor mounts
Posted by Steve, May-31-04 04:31 PM
motormonts= motor dosent jump around as easy when driving/launching, helps with launching a good amount. You'll feel everything in the car shake.
review on 2gnt.com
http://www.2gnt.com/nuke/modules.php?name=Reviews&rop=showcontent&id=119
|
75431, RE: Full polyureathane/solid pass side motor mounts
Posted by rhui, Jun-01-04 01:15 PM
Thnx for the reply steve!
Do you know if those inserts are for the front,rear, and sides? or just front and rear?
The review implies its all around... but i called them and they said they arent sure but they think its just front and rear.
|
75432, RE: Full polyureathane/solid pass side motor mounts
Posted by Keith2172, Jun-01-04 01:20 PM
The ones I got were solid on the the passenger and driver side, and the front and rear were inserts. I love them, and every girl that rides with me likes the vibration :thumbsup
|
75435, RE: Full polyureathane/solid pass side motor mounts
Posted by rhui, Jun-01-04 02:05 PM
Originally posted by Keith2172
The ones I got were solid on the the passenger and driver side, and the front and rear were inserts. I love them, and every girl that rides with me likes the vibration :thumbsup
Mind me asking what brand and where you got the solid sides and inserts for front and rear?
Thnx,
Ritchie
|
75438, RE: Full polyureathane/solid pass side motor mounts
Posted by turbo8u, Jun-01-04 02:44 PM
solid front from howell and prothanes from summitracing.com
|
75456, RE: Full polyureathane/solid pass side motor mounts
Posted by InFiNiT3, Jun-01-04 09:07 PM
check my review on the prothane motor mounts.. info on where they can be perchased is listed :)
jake
The ATX God! *LOL*
|
75545, RE: Full polyureathane/solid pass side motor mounts
Posted by Keith2172, Jun-03-04 05:51 AM
Turbo8u is correct, I got the Prothanes from Summit, like $65, they were the more expensive ones in the catalog :shrug , but $65 isn't really all that expensive. Just so you know what you're getting into, the front and rear I just had to insert the little pieces around the existing mount. But the side mounts I ended up having to cut the rubber out of the mount, then, carefully so as not to damage the aluminum housing, I used a Sawzall to cut the steel portion out of the housing to fit the solid inserts. Dont try this with a hacksaw, you'll hate life. That may all sound a bit confusing but when you look at the mount it makes sense. Not to hard a job, if a moron like me can do it then you'll have no prob :thumbsup
| |