| Go back to previous topic |
| Forum name | Performance/Engine |
| Topic subject | crane ignition |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=75312 |
75312, crane ignition
Posted by Sitinlo, May-29-04 04:24 AM
What all do i have to do to set up the 2 stage rev on the hi6 di2
|
75316, RE: crane ignition
Posted by djtrickee, May-29-04 06:33 AM
set the level for each stage and feed them 12V when you want it to engage.
I run mine through a covered switch to a micro nitrous switch that is attached to the clutch. Therefore the switch must be on and the clutch must be pushed down, triggers a LED to let me know its active and it sets the stage 1.
|
75336, RE: crane ignition
Posted by Blizare, May-29-04 10:43 AM
Originally posted by djtrickee
set the level for each stage and feed them 12V when you want it to engage. I run mine through a covered switch to a micro nitrous switch that is attached to the clutch. Therefore the switch must be on and the clutch must be pushed down, triggers a LED to let me know its active and it sets the stage 1.
cool.
|