Hey im wondering if there are any other race computers out there that i can use for my 99, since the AF/X one is only for the 97? or would i be better off buy a S-AFC?
Thanks for your help

well what do you want?? fuel control, spark/timing advance, higher rev limiter,etc..
The afx unit can easily be wired up to work just fine on your year if your manual tranny, just some splicing to get the correct wires. basically just splice it till all the same colored wires go to the right spots.

or you can get the safc to control fuel a little bit, but if your non-turbo its really not worth it, unless your turbo or spraying then it has its advantages.

Our get a megasquirt,ems,haltec,dfi,tec3,etc..
there are tons of options out there for engine control you just need to decide what you want.

well what about us with automatic tranny's? I kno u cant use the af/x one but can u use another system to raise the revlimiter cuz its set at 6800 (why lord? lol)

Thanks

Originally posted by miamilakeseclipse
can u use another system to raise the revlimiter cuz its set at 6800 (why lord? lol) Thanks

Regardless of any other mods, if you are running stock cams, you shouldn't be running the RPM's much past 6600-6800 anyways. Stock cams are horribly restrictive and absolutely kill the torque curve at those RPM's and higher.

However, with the right camshaft and the proper valvetrain upgrades, the sky is the limit.

Well i am planning on dropping in a Zex 50 shot in about 2 weeks. would i be better off with the AF/X computer and splicing, or should i buy the S-afc? cause the AF/X advances timing right? and thats not good for nitrous applications.
thanks

P.S. oh yeah is the S-AFC good to have with nitrous? does it help alot?
thanks

for a 50-75 shot you can just run with the stock PCM and thats it.
for 100 shot and up I would just recommend atleast the fuel pump rewire mod and maybe a warlbro with the safc.

and I thought the zex kit doesnt really work well on these cars.

and for the auto guys your out of luck for now. well you could always switch to the neon 3 speed non-computer controlled auto.
someone will eventually figure it out though I know there is some ECU code cracking in the works as we speak.

Originally posted by mcgyvr
for a 50-75 shot you can just run with the stock PCM and thats it. for 100 shot and up I would just recommend atleast the fuel pump rewire mod and maybe a warlbro with the safc. and I thought the zex kit doesnt really work well on these cars. and for the auto guys your out of luck for now. well you could always switch to the neon 3 speed non-computer controlled auto. someone will eventually figure it out though I know there is some ECU code cracking in the works as we speak.

yea i hope they r makin a ecu for us haha lol,

umm if ure going to run a 50 wet IMP get one range colder spark plugs, if 75 then get the plugs, a walbro fuel pump n i would pick up an afc, i wouldnt go over 75 w/ stock internals.

Theres a guy on ebay thats reflashing 420a ecu's 95 to 99. Ajna was curious about it and wanted the email, so I called the guy and he said that anyone here that has a stock car , he'd be willing to do the reflash for free , provided you post the before and after dyno numbers and graphs here on the board. He said he could do auto's too if the demand was there.

Originally posted by Initial DSM
Theres a guy on ebay thats reflashing 420a ecu's 95 to 99. Ajna was curious about it and wanted the email, so I called the guy and he said that anyone here that has a stock car , he'd be willing to do the reflash for free , provided you post the before and after dyno numbers and graphs here on the board. He said he could do auto's too if the demand was there.

got a link to the ebay ad or something, you sure its not the idiots selling resistors for the coolant temp sensor,etc..

oh I know the ones that your talking about, Let me try and find it.

Originally posted by mcgyvr

Originally posted by Initial DSM Theres a guy on ebay thats reflashing 420a ecu's 95 to 99. Ajna was curious about it and wanted the email, so I called the guy and he said that anyone here that has a stock car , he'd be willing to do the reflash for free , provided you post the before and after dyno numbers and graphs here on the board. He said he could do auto's too if the demand was there.

got a link to the ebay ad or something, you sure its not the idiots selling resistors for the coolant temp sensor,etc..

no as far as i know its real deal... not tps bullshit. someone should call him, he said he'll give anyoen who dynos it on a stock car a free ECU...

i would do it, but i dont have the money

well would you like to give us his email so we can try? lol

Ill send him my ecu right now, give me a link or email.
I doubt this is true though, and if so I bet chrysler would like to talk to him about tampering with their code :) but who cares...

zex doesnt work well with our cars? has anyone else heard that? why would it not work well?
thanks

can u give me his email or phone number so i can speak with him? I would definetly dyno before and after for him especially if it is for free hehe, my email is mfava@mail.com, s/n on aim/aol is mnf155

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33597&item=2478542471

talking about those guys ?

Alain

Or do a search in the pits section. The thread isnt too old. Ajna made the post. I spoke to the guy for a good half n hour on the phone and posted his email and phone # in one of my replies in the original thread. He also mentioned in the future he'd work on a chip for nt guys with turbo.

wow.. i wonder if this is legit and works... someone needs to get one of these reflashed ecu's and see if it works.. if i had the $ and and extra ecu i would definately go for it.

Does anyone know where this guy is located??? I will drive and get it flashed!

I emailed the guy from ebay a couple times and he says he is from Oregon. I am very tempted to have him reprogram my computer. He has an excellent Ebay rating. I also noticed he reprograms Neon ECUs. Maybe someone on a Neon forum knows anything.

Hi! New to the eclipse scene and wondering besides the a/fx what are good ecu's for the 99 clips?

99 clips gs w/manual tranny

Originally posted by norfolkclips
Hi! New to the eclipse scene and wondering besides the a/fx what are good ecu's for the 99 clips? 99 clips gs w/manual tranny

None, sir.

Welcome to 2GNT.

what is the guys e-mail?

Thanks

mitsubishi_specialties@yahoo.com