| Go back to previous topic | | Forum name | Performance/Engine | | Topic subject | exhaust ? | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=74244 |
74244, exhaust ?
Posted by shibby97, May-07-04 11:30 PM
i am in the process of installing a turbo on my GS. i'm looking to get a 3" exhaust but can't find one unless i am to get a custom one made. my question is, would i be able to install say an EVO exhaust meant for a GST on my turbo'd GS or would it not fit properly?
|
74246, RE: exhaust ?
Posted by Star Turbo Talon, May-08-04 02:20 AM
it fits awesom and loks bad ass from the rear. the gst rear section goes under the rear subframe. al you see is muffle and BAM huge ass pipe...lol It will work and look good too. I am trying find one myself.
Terry
96 Eagle talon ESI
Star Stage II - Boost/oil/EGT gauges
97 Eclipse
Greddy header/evo exhaust - Stage 2 6 puck Sprung hub MIBA clutch - Shortened shifter - Koni Yellows w/eibach prokit - Stillen Fr/Rr swaybars - ceramic intake - DEI Keyless entry alarm - Niche 17" Shoks
Waiting to be installed: Apexi AFC, HKS EVC IV, ceramic intake, 450 Turbo injectors, SFMU/return line, GSX Front brakes (need rotors)
|
74259, RE: exhaust ?
Posted by Steve, May-08-04 07:30 AM
2g gst-'s have the same exhaust piping as us with the exception of the better flowing muffler. Any gs-t catback fits our 2gnt's. I'd go custom tho just grab a muffler and some 3 inch piping from jcwhitney. Good luck..I do believe Im right?
|
74268, RE: exhaust ?
Posted by Star Turbo Talon, May-08-04 11:34 AM
the oyl problem with that is premade exhausts are bent welded then aluminized, if you weld one the welds will not be Aluminized. Not to mention i have not seen the EVO muffler for for sale for a price worth it. If you know a place i would start welding exhausts in my spare time.
Terry
96 Eagle talon ESI
Star Stage II - Boost/oil/EGT gauges
97 Eclipse
Greddy header/evo exhaust - Stage 2 6 puck Sprung hub MIBA clutch - Shortened shifter - Koni Yellows w/eibach prokit - Stillen Fr/Rr swaybars - ceramic intake - DEI Keyless entry alarm - Niche 17" Shoks
Waiting to be installed: Apexi AFC, HKS EVC IV, ceramic intake, 450 Turbo injectors, SFMU/return line, GSX Front brakes (need rotors)
|
74271, RE: exhaust ?
Posted by shibby97, May-08-04 03:09 PM
there's a place about 150 miles from where i live that does custom exhaust work and they have the machine for the mandrel bends. i was just wondering if it would just be easier to just buy an exhaust that is already set up. also, do any of you guys know approx what a custom 3" turbo back exhaust would run?
| |