| Go back to previous topic | | Forum name | Performance/Engine | | Topic subject | Need help ASAP!!! Major Problems!!! | | Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=74229 |
74229, Need help ASAP!!! Major Problems!!! Posted by LoweredEclipse99, May-07-04 02:25 PM
Hey what's up? I just had lowering springs installed on my ride, as well as a front upper, and rear upper strut bar. Problem is, now my car has a terrible shake, and I don't know what it could be. I have to bring it back to the shop tomorrow morning. He said he would play around with it, but if I could get some insight I would like to get it fixed ASAP. Could it be that the alignment changed, or the strut bars are too tight??? I have 17" rims on it, and it has been good until now. This shop is well known for doing good work, but truthfully he looked somewhat lost. If anyone out there knows what to do about this please let me know. Thanks!
|
74230, RE: Need help ASAP!!! Major Problems!!! Posted by Sitinlo, May-07-04 03:13 PM
your car probably needs alignment :shrug
|
74234, RE: Need help ASAP!!! Major Problems!!! Posted by LoweredEclipse99, May-07-04 04:16 PM
Is it common to need an alignment "after" installing drop springs??? Before the install, it ran perfect. Now it has really bad vibration going on. Ever had any experiences like this???
|
74235, RE: Need help ASAP!!! Major Problems!!! Posted by djtrickee, May-07-04 04:50 PM
This guy has the same problem as you!!!
http://forums.2gnt.com/dcboard.php?az=show_topic&forum=6&topic_id=23783&mesg_id=23783&page=
|
74237, RE: Need help ASAP!!! Major Problems!!! Posted by CODE4, May-07-04 06:29 PM
Originally posted by LoweredEclipse99 Is it common to need an alignment "after" installing drop springs??? Before the install, it ran perfect. Now it has really bad vibration going on. Ever had any experiences like this???
Yes. Camber, Caster, and Toe are almost ALWAYS affected by altering your suspension geometry. Does not matter what vehicle you are talking about.
|
74240, RE: Need help ASAP!!! Major Problems!!! Posted by Blizare, May-07-04 08:27 PM
Originally posted by CODE4Originally posted by LoweredEclipse99 Is it common to need an alignment "after" installing drop springs??? Before the install, it ran perfect. Now it has really bad vibration going on. Ever had any experiences like this??? Yes. Camber, Caster, and Toe are almost ALWAYS affected by altering your suspension geometry. Does not matter what vehicle you are talking about.
always are.
when I dropped 3" my rear camber went to -3.7*. factory is -1.5* in the rear a 0* in the front. The camber is really bad and theres that shimmy feeling because the only contact patch your tire is getting is on the inside edge.
edit: $15 camber mod IMO. Fixed mine -2*...yay!! within spec!
| |