just curious how much they cost for later on
msd-dis2 or another, if better
A/F from Corbin since it seems better
EGT gauge
boost controller
turbo timer
oil pressure gauge,maybe

also a few ?'s. will i need anything else when i buy the gauges to install them? is the profec B (think thats the one) the only boost controller that is able to switch from lo to hi boost with a button? and is it really worth the $$ it sells for?



Matt
95 Eclipse GS
bustrblue1@aol.com
HKS Super Dragger muffler
Short Ram intake
OBX short shifter (minus 2")
Ignited Engine Start button
Yellow painted interior (done by CYAN)

wires and plat plugs soon

LAST EDITED ON 16-Nov-01 AT 11:37 PM (PST)

>just curious how much they cost
>for later on
>msd-dis2

$319.99 plus $50 for the tach adapter.

>A/F from Corbin

$60 shipped

>EGT gauge

Usually $100 - $150

>boost controller

Manual, probably $40 electronic, I don't know

>turbo timer

$100

>oil pressure gauge,maybe
$50 - $75

>also a few ?'s. will i
>need anything else when i
>buy the gauges to install
>them?

Gauge pod

is the profec B
>(think thats the one) the
>only boost controller that is
>able to switch from lo
>to hi boost with a
>button? and is it really
>worth the $$ it sells
>for?
>

No idea.........






Contemplating turbo. . . . . . .

http://hometown.aol.com/ohshootuhh/

All Motor Beast in need of MAJOR TUNING


Perf:
KYB AGX Struts
Neuspeed Sport Springs
5 Strut Bars (2 F/U, F/L, R/U, R/L)
Sprint Front Camber Kit
$15 Rear Camber Kit
Corbin's A/F Gauge
MSD DIS-2 Ignition System
Some Regrind Cams that need High Compression (which I don't have)
Ported Intake Manifold
Ported Throttle Body
Nameless Cold Air Intake with a K&N Filter
Custom 2 1/2 inch exhaust with Dual DTM Muffler
Empty Catalytic Convertor
Energy Suspension Motor Mount inserts
Hurricane_GS Short Shifter
Symborsky Shift Kit
Clutchmasters Stage 3 Modular
225/50/16inch Wheels and Tires


Audio:
Alpine CD Head Unit
Alpine Flex4 25W X 4 for Fronts and Rears
Alpine V-12 450W X 1 for Subs
Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears
Blaupunkt 3 way 6x9's in the rears
3 MTX 5000 10" 12 ohm subs running 4 ohms mono

http://www.extreme420a.com

thanks for the info. i already have a triple gauge pod, not installed, is there any other good ones besides the msd? and where could i mount a 4th gauge? (oil pressure) i'll have A/F, boost and EGT in the gauge pod



Matt
95 Eclipse GS
bustrblue1@aol.com
HKS Super Dragger muffler
Short Ram intake
OBX short shifter (minus 2")
Ignited Engine Start button
Yellow painted interior (done by CYAN)

wires and plat plugs soon

for the oil pressure you will also need an adapter to go into the fitting on the back of the block...I cant remember what size it is though..anyone that sells autometer should have the adapter if of course its autometer gauges you get

LAST EDITED ON 17-Nov-01 AT 01:02 AM (PST)

AUtometer has a gauge bezel that goes around the stock gauge cluster that will hold (2) 2 1/16 inch gauges. Thats what I am getting to keep the sleeper look.




Contemplating turbo. . . . . . .

http://hometown.aol.com/ohshootuhh/

All Motor Beast in need of MAJOR TUNING
Perf:
KYB AGX Struts
Neuspeed Sport Springs
5 Strut Bars (2 F/U, F/L, R/U, R/L)
Sprint Front Camber Kit
$15 Rear Camber Kit
Corbin's A/F Gauge
MSD DIS-2 Ignition System
Some Regrind Cams that need High Compression (which I don't have)
Ported Intake Manifold
Ported Throttle Body
Nameless Cold Air Intake with a K&N Filter
Custom 2 1/2 inch exhaust with Dual DTM Muffler
Empty Catalytic Convertor
Energy Suspension Motor Mount inserts
Hurricane_GS Short Shifter
Symborsky Shift Kit
Clutchmasters Stage 3 Modular
225/50/16inch Wheels and Tires


Audio:
Alpine CD Head Unit
Alpine Flex4 25W X 4 for Fronts and Rears
Alpine V-12 450W X 1 for Subs
Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears
Blaupunkt 3 way 6x9's in the rears
3 MTX 5000 10" 12 ohm subs running 4 ohms mono

http://www.extreme420a.com

i like that. how much is it and whats a 5th gauge i could get since i'll have 5 places? also, are autometer gauges the best to get or does it really matter?



Matt
95 Eclipse GS
bustrblue1@aol.com
HKS Super Dragger muffler
Short Ram intake
OBX short shifter (minus 2")
Ignited Engine Start button
Yellow painted interior (done by CYAN)

wires and plat plugs soon

Boost Gauge, EGT, Oil Pressure, Fuel Pressure, oil temp


--Sean B.

"Our time is here, Our time is now, Team 2gnt."

Sponsored by New Edge Racing
http://www.newedgeracing.com

does anyone know when corbin is going to have to another new batch of gauges ready? cus they look sweet and i would definitely want one.