can the old mopar 2.5L turbo rods work in a 2.4? i cant find if they do or not but im pretty sure of it, i found a SWEET ASS deal on four of them and i know theyre strong as hell

input is appreciated
_________
96 talon esi-t
san clemente, ca


as needles of ice
are the ill winds' talons
the coldest of shadows
they seep unto the bone

silent souls leave .308 holes

Logic would tell me they are too tall but I think you know more about it then I do.

Try here. http://www.allpar.com/ <-- I love this site.

i doubt it.......not sure though

allpar is the way to go!

Terry
96 Eagle talon ESI
rear disk conversion Star Stage II - Optima locate in the hatch - momo Steering wheel - Boost/oil/EGT gauges, HKS TT

97 Eclipse
Greddy header/evo exhaust - Stage 2 6 puck Sprung hub MIBA clutch - Shortened shifter - Koni Yellows w/eibach prokit - Stillen Fr/Rr swaybars - DEI Keyless entry alarm - Niche 17" Shoks

Waiting to be installed: Apexi AFC, HKS EVC IV, ceramic intake, 450 Turbo injectors, SFMU/return line, GSX Front brakes (need rotors)

allpar wasnt to helpful but i DID find out the old 2.2/2.5 tII rods are STRONGER than the srt rods :thumbsup, the downfall is the stock rod bolts arent that strong, so i'd have to get ARP rod bolts, no biggy. they DO work...and are actually an upgrade from the 2.4 rods. however, slight modification to the pin end and needs to be re-bushed and drilled for oil holes to work with other pistons.



#2 is the 2.5L rod, #4 is the srt4/pt turbo rod

im still thinking about it...but i dont know

edit: just because its a 2.5L rod doesnt always mean that it is any longer than the 2.4L rod ;)

thanks for the help guys!
_________
96 talon esi-t
san clemente, ca


as needles of ice
are the ill winds' talons
the coldest of shadows
they seep unto the bone

silent souls leave .308 holes

Jehosephat, what rod is that on the far left?

Originally posted by Uberingram
Jehosephat, what rod is that on the far left?

crowers baby :) probably what i'll go with, carrillo's is just to damn expensive x(


_________
96 talon esi-t
san clemente, ca


as needles of ice
are the ill winds' talons
the coldest of shadows
they seep unto the bone

silent souls leave .308 holes

Originally posted by turbo8u
can the old mopar 2.5L turbo rods work in a 2.4? i cant find if they do or not but im pretty sure of it, i found a SWEET ASS deal on four of them and i know theyre strong as hell input is appreciated _________ 96 talon esi-t san clemente, ca as needles of ice are the ill winds' talons the coldest of shadows they seep unto the bone silent souls leave .308 holes

T2 rods are dirt cheap AND fit 2.4 but they can't compare to the SRT internals, I had a set, the T2 rods are actually thicker but not as strong and they buckle at 375-425WHP - the question is why???? I wouldn't want to us that shit when the SRT interals are so fuckin cheap

hmmm... i wonder if oldskool turbododges have the same exhaust boltpattern
(skitters off to check his manuals)

no they dont...
damnit.