2GNT.com Forums - Printer friendly page, topic ID #72139 -

Go back to previous topic
Forum name	Performance/Engine
Topic subject	Intake Manifold Shootout
Topic URL	https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i5&topic_id=72139
72139, Intake Manifold Shootout Posted by TalonSpeed, Apr-05-04 05:26 AM http://206.124.12.138/manifolds/index.html This is for the 4g63 engine, but should shed some light on how intake manifolds effect the power band. 11 manifolds are going to be tested!!
72148, RE: Intake Manifold Shootout Posted by Super20G, Apr-05-04 06:13 AM 4g's have a little more support than us, heh? hehe
72153, RE: Intake Manifold Shootout Posted by Skrilla, Apr-05-04 06:55 AM Originally posted by Super20G 4g's have a little more support than us, heh? hehe hell ya but this will definitely help us to design our own
72158, RE: Intake Manifold Shootout Posted by BoostedGS, Apr-05-04 07:26 AM The testing went really well. Some of the manifold put down some impressive numbers, and surprising torque differences. Exact results are still secret at this point though, but should be out soon. Just a little inside info for ya, since I'm a site admin on RMDSM.org. If you go to www.rmdsm.org the banner at the top is a pic of my car and the owner of the site, Dave Landry's car. His car is the one that was used to test all the manifolds.
72162, RE: Intake Manifold Shootout Posted by TalonSpeed, Apr-05-04 07:52 AM You should tell them to make one for the 420a engine. When will the results be released?? a few hours, days, weeks??
72164, RE: Intake Manifold Shootout Posted by nightwolf2369, Apr-05-04 08:08 AM i wanna know too.
72166, RE: Intake Manifold Shootout Posted by ajna_star, Apr-05-04 08:16 AM fast fabrications makes an intake mani for the 420a right?
72181, RE: Intake Manifold Shootout Posted by TalonSpeed, Apr-05-04 11:05 AM Originally posted by ajna_star fast fabrications makes an intake mani for the 420a right? I may be wrong on this, but an intake manifold is the plenum + runners. If that is true Fastfabs makes a plenum that attaches to the lower half of the stock runners. It looks like a good unit and should give good gains. The fastfabs plenum is light years ahead of the stock plenum and shorter runners should help the top end out.
72190, RE: Intake Manifold Shootout Posted by Skrilla, Apr-05-04 12:52 PM Originally posted by TalonSpeed Originally posted by ajna_star fast fabrications makes an intake mani for the 420a right? I may be wrong on this, but an intake manifold is the plenum + runners. If that is true Fastfabs makes a plenum that attaches to the lower half of the stock runners. It looks like a good unit and should give good gains. The fastfabs plenum is light years ahead of the stock plenum and shorter runners should help the top end out. no not yet if ever
72210, RE: Intake Manifold Shootout Posted by Dave41079, Apr-05-04 03:50 PM Dead link...I couldn't get anything to come up.
72212, RE: Intake Manifold Shootout Posted by 2g99RSNC, Apr-05-04 04:37 PM i should be testing the fast fabrications one soon on a turbo 420A so we hope to get numbers for it soon for u guys ^^Work in progress pic www.fastfabrications.com
72257, RE: Intake Manifold Shootout Posted by Uberingram, Apr-05-04 07:36 PM Originally posted by 2g99RSNC i should be testing the fast fabrications one soon on a turbo 420A so we hope to get numbers for it soon for u guys Any ETA on that?
72275, RE: Intake Manifold Shootout Posted by tim97rs, Apr-06-04 04:11 AM Originally posted by Uberingram Originally posted by 2g99RSNC i should be testing the fast fabrications one soon on a turbo 420A so we hope to get numbers for it soon for u guys Any ETA on that? when ice cycles hang from the roof of hell....
72290, RE: Intake Manifold Shootout Posted by Skrilla, Apr-06-04 05:48 AM Originally posted by tim97rs Originally posted by Uberingram Originally posted by 2g99RSNC i should be testing the fast fabrications one soon on a turbo 420A so we hope to get numbers for it soon for u guys Any ETA on that? when ice cycles hang from the roof of hell.... BUWAAHAHAHAHA fuck that is hilarious, I've never heard that one before
72321, RE: Intake Manifold Shootout Posted by DR1665, Apr-06-04 12:06 PM Originally posted by Skrilla Originally posted by tim97rs Originally posted by Uberingram Originally posted by 2g99RSNC i should be testing the fast fabrications one soon on a turbo 420A so we hope to get numbers for it soon for u guys Any ETA on that? when ice cycles hang from the roof of hell.... BUWAAHAHAHAHA fuck that is hilarious, I've never heard that one before Me either. What's an ice cycle? How bizare that not only will there have to be ice in hell, but someone will have to ride a bike made of ice upside down freezing their balls off. I guess that's why they call it hell imo... :P
72322, RE: Intake Manifold Shootout Posted by Uberingram, Apr-06-04 12:08 PM Originally posted by DR1665 Originally posted by Skrilla Originally posted by tim97rs Originally posted by Uberingram Originally posted by 2g99RSNC i should be testing the fast fabrications one soon on a turbo 420A so we hope to get numbers for it soon for u guys Any ETA on that? when ice cycles hang from the roof of hell.... BUWAAHAHAHAHA fuck that is hilarious, I've never heard that one before Me either. What's an ice cycle? How bizare that not only will there have to be ice in hell, but someone will have to ride a bike made of ice upside down freezing their balls off. I guess that's why they call it hell imo... :P A snowball's chance in hell. :shrug
72324, RE: Intake Manifold Shootout Posted by turbo8u, Apr-06-04 12:10 PM hmmm...what if we just cut off the flange for the 4g63 and welded our flange to it? besides the tb location, thatd be some seriously rigged shit imo :P heh _________ 96 talon esi-t san clemente, ca as needles of ice are the ill winds' talons the coldest of shadows they seep unto the bone silent souls leave .308 holes
72333, RE: Intake Manifold Shootout Posted by The1Bill, Apr-06-04 01:06 PM I don't think that the port spacing on the heads (4G63 VS. 420a) are the same, otherwise, it could be a viable option to hack off the flange, hack off the plenum, put a 420a flange on it, and rotate the plenum. By viable, I mean a waste of time. -=B-=
72336, RE: Intake Manifold Shootout Posted by 420AYE, Apr-06-04 01:16 PM blah...wake me when there are results...
72337, RE: Intake Manifold Shootout Posted by Initial DSM, Apr-06-04 01:16 PM Originally posted by The1Bill I don't think that the port spacing on the heads (4G63 VS. 420a) are the same, otherwise, it could be a viable option to hack off the flange, hack off the plenum, put a 420a flange on it, and rotate the plenum. By viable, I mean a waste of time. -=B-= Haha :) I asked Magnus to do that once and Marco said , Sure! ...for 1500 bucks.. :(
72347, RE: Intake Manifold Shootout Posted by The1Bill, Apr-06-04 03:45 PM It would be less labour intensive for him to just make a manifold for us. By less labour intensive, I mean that he still wouldn't bother with it. -=B-=
72437, RE: Intake Manifold Shootout Posted by TalonSpeed, Apr-07-04 05:00 PM Results are posted
72448, RE: Intake Manifold Shootout Posted by ultimar, Apr-07-04 06:45 PM where?
72450, RE: Intake Manifold Shootout Posted by TalonSpeed, Apr-07-04 06:57 PM http://nabr.jayntguru.com/shootout/ The stock manifold did well. The venom did well especially since everyone says they are junk.
72456, RE: Intake Manifold Shootout Posted by 420AYE, Apr-07-04 11:46 PM oh c'mon. its all about the horsepower figures!
72472, RE: Intake Manifold Shootout Posted by tim97rs, Apr-08-04 05:00 AM those results mean absolutly shit to us. how about a manifold for the 420a, that someone has ACTUALY built for the 420a, TESTED on the 420a, and ready to SELL to someone who has a 420a!