What is a good short shifter that isnt really expensive, and where can i find it? Thanks

Email Glenn, He is Hurricane_GS on the board. He mods the stock shifter 2 inches shorter for $40 and you send him your stock one after you receive his.



http://hometown.aol.com/ohshootuhh/

All Motor Beast in need of MAJOR TUNING

Perf:
KYB AGX Struts
Neuspeed Sport Springs
5 Strut Bars (2 F/U, F/L, R/U, R/L)
Sprint Front Camber Kit
$15 Rear Camber Kit
Corbin's A/F Gauge
MSD DIS-2 Ignition System
Some Regrind Cams that need High Compression (which I don't have)
Ported Intake Manifold
Ported Throttle Body
Nameless Cold Air Intake with a K&N Filter
Custom 2 1/2 inch exhaust with Dual DTM Muffler
Empty Catalytic Convertor
Energy Suspension Motor Mount inserts
Hurricane_GS Short Shifter
Symborsky Shift Kit
Clutchmasters Stage 3 Modular
225/50/16inch Wheels and Tires


Audio:
Alpine CD Head Unit
Alpine Flex4 25W X 4 for Fronts and Rears
Alpine V-12 450W X 1 for Subs
Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears
Blaupunkt 3 way 6x9's in the rears
3 MTX 5000 10" 12 ohm subs running 4 ohms mono

i got wun...drives like a CHAMP, imo.

Glen alert!



"Kaptain Mike"
theblueghost@hotmail.com
http://www.heavenz-not-0verflowing.com/Kaptainkillgore/index.htm
AIM= "KaptainKillgore" or "KaptainMyke"
1997 RS

Ya I made my own, well had a friend do it for free, hehe!! Works great.


Mod List:
-NGK BKR5E-11 Plugs
-Magnecore 8.5 Wires
-AEM CAI(thanx to endless73)
-GS-T Muffler
-Upper Front Strut Bar
-Custom Short Shifter!

Look for the B&M short shifter is you are not inclined to hack your own yourself. It actually moves the shift point and not the height which I prefer as cutting the height introduces more required effort where as retaining the stock height and moving the shift point will keep the effort relatively the same with a much imporved throw. The B&M can be had for around $110.

MuRiX
97 Eclipse GS HRC Stage IV+
Sitting and collecting dust most of the time..
A.D.P.
http://www.murix.com

no no get glenn's it's better, shorter and cheaper. i have one it's awsome.


In a barbaric world, it's better to be
the ultimate barbarian than the ultimate
diplomat.
- Doug Rau
"He who has lost freedom has nothing
left to lose."
-Unknown
"Every normal man must be tempted at
times, to spit on his hands, hoist the
black flag, and begin slitting throats."
- H.L. Mencken
Make friends of your enemies, or kill them.
- Proverb

BKR5E-11's
cone filter
brospeed muffler from mx-3
exhaust leak (mad power gain)
craigd887@aol.com

i also have the B & M but i have not installed it yet.

What's wrong with Stillen products guys? I never hear jack about Stillen but most of my shit's Stillen and I love every bit of it. Get the Stillen short throw, the gears are a lot closer together... Hacking your stock one off or paying someone to do so is silly, not to mention it's still stock, just lower.
--
Brad Rickard
98 GS HRC Stage V (nuff said)

Brad,

Actually, nothing is wrong with Stillen products. His stuff is generally very high quality. Well, there is one problem with it. He charges ridiculous high prices.

MuRiX
97 Eclipse GS HRC Stage IV+
Sitting and collecting dust most of the time..
A.D.P.
http://www.murix.com

I myself would have everything Stillen on my car, but it's like you pay for the name and stuff....It's like designer jeans and such, you pay for name brand. Kinda like Sony vs. Panasonic, etc.


"Kaptain Mike"
theblueghost@hotmail.com
http://www.dsmscene.com
http://www.heavenz-not-0verflowing.com/Kaptainkillgore/index.htm
AIM= "KaptainKillgore" or "KaptainMyke"
1997 RS